21

Apr

Can You Put A Hot Pan On Quartz?

Quartz countertops are manmade and tough and due to their tough nature, you will hear some homeowners asking, can you put a hot pan on quartz?

While the countertops are tough and heat-resistant, they aren’t heatproof. This means that the counters can be resistant to the heat to a certain degree, after which they can’t deal with the high temperatures. This means you might get away with placing the hot pan on the countertops once or twice but continuing with it will cause serious damage to the surfaces.

To answer your question about whether you can put hot pans on quartz, no, you shouldn’t.

What other things shouldn’t you do to the countertops?

Besides exposing the countertops to a lot of heat, there are plenty of other things you shouldn’t do to your countertops. Some of these things include:

Don’t ignore spills

Quartz is tough, but you shouldn’t test it. When spills happen, move with haste and remove them before they get worse. You should especially move with haste and remove them if they are juice, wine, vinegar, juice, or tea.

The reason you should remove these liquids is because they can be corrosive or acidic to the countertops and damage them. You don’t want this, do you?

Don’t cut directly on the countertops.

Quartz is one of the toughest materials in the market, as it’s fortified with manmade polymers that make it even tougher. While the countertop is tough, don’t cut directly on it. This is because the sharp knives will scratch the surface, giving them an ugly look.

Whenever you are looking to cut anything in the kitchen, use a cutting board. Don’t cut directly on the countertop, as you will damage it.

Don’t use harsh cleaning products.

You may want your countertops to look their best, so you might be tempted to use the toughest cleaning products such as bleach and others, but don’t go that route. While bleach and other high pH cleaners are highly effective, you shouldn’t use them as they can damage your surface.

You should note that regardless of how dirty the countertops look, you don’t need tough cleaning products to keep them clean. Mild soap and water are enough to give the surfaces a clean look and also remove bacteria and minor stains that might be forming.

Don’t slide things on the countertops.

Quart counters can stand a lot of abuse, but you can protect them from scratches and other forms of damage by being cautious about how you handle them. As a rule of thumb, don’t move ceramic, metal dishes, or utensils along the countertop surfaces.

You also shouldn’t slide knives and other potentially abrasive materials across the countertops, as they can leave black marks that might be difficult or impossible to remove.

Don’t use permanent markers on the countertops.

It’s tempting to let the kids do their homework on the kitchen island as you are making dinner. While you love your kids and want to spend as much time with them as possible, don’t let them do their school projects on the counters, especially if the projects involve permanent markers.

This is because it’s only a matter of time before the kids start doodling on the countertops with the permanent markers. And as you can guess, the permanent markers will adhere to the countertop surface and become hard to remove. In fact, you can’t remove the marker with anything else other than a harsh chemical that has high chances of causing damage.

If you have to have the kids in the kitchen, ensure they are using water-based markers. If the kids play with sharp objects, protect the surfaces, so they don’t damage the counters.

In conclusion,

These are some of the things you shouldn’t do to your quartz kitchen countertops Potomac. For the countertops to retain their look for a long time, you need to show love to them. Remember, you installed them for their strong, gorgeous, and easy-to-maintain look, so you need to take good care of them.

As a rule of thumb, avoid all of the above and clean the counters regularly. You also should register the countertops as soon as you buy them to activate the warranty.

12

Apr

Can Heat Ruin Granite Countertops?

Can heat ruin granite countertops? The simple answer is yes, heat can damage your countertops. Although granite is tough and heat-resistant, it isn’t heatproof. While the countertops might not get damaged the first time you place a hot pan or pot on them, continued heat exposure is bound to damage them.

What can you do to protect your countertops?

As mentioned above, you can get away with placing hot items directly on the granite surfaces, but if you repeatedly do it, you are pushing your luck too far, and it becomes a matter of when you will ruin your countertops.

To avoid this, make it a habit to place a trivet or hot pad on the countertops all the time. This way, even when you are in a hurry to remove the hot pot from the fire, you can easily reach the trivet and place it there instead of placing it directly on the countertops.

If you don’t have a trivet, don’t take the hot pot from the fire and place it directly on the countertop. Instead, give it a few minutes to cool down, after which you can place it on the countertops. This means that when the food is ready, you should switch off your stove and let the pot cool.

Before you place the pot on the countertops, remember to wipe the pot’s underside to remove any black or burn marks that would damage the granite surface.

What should you do to already damaged countertops?

If your countertops have already been ruined, try to restore them using pastes and liquids. There are plenty of special creams and solutions that you can use to polish your granite surfaces and remove any stains and marks on them.

The cool thing is you don’t need to hire a professional to help remove the stains—you can easily do it on your own. You should rub the burn marks from the countertops using creams and solutions, but if some marks are hard to remove, ask a contractor to look into them.

If there are burn marks that don’t come off even after using a professional service, try to use your warranty and get a replacement.

What other things shouldn’t you do to your granite surfaces?

Other than not placing hot items directly on the countertops, there are plenty of other things you shouldn’t do to keep your surfaces in top shape. Some of these things include:

Don’t work with raw meat on granite surfaces.

Raw meat looks harmless, and it’s true it will not hurt your granite, but it harbors plenty of bacteria that can get to the other foods you prepare on the surfaces. Many homeowners also cleanse their surfaces after preparing meat on them, which can be harmful, especially when they use harsh products to do the cleansing.

Don’t stand on the countertops.

The countertops are made from stone, so there is no harm in standing on them, right? Wrong. Although the countertops are made from natural rock, the rock has veins, fissures, and striations that can crack when you place a lot of weight on them.

To keep your countertops in top shape, don’t sit, stand or place any heavy item on the countertops, especially on the edges.

If you have to reach the top shelf or change the light bulbs, don’t step on the countertops. Instead, have a stool or ladder in place.

Some people sit on the countertops as they are preparing meals. Don’t do this, and to fight the temptation, have a chair in the kitchen.

Don’t wash your children in the under-mount kitchen sink

The kitchen sink might seem like a fun place to wash your kids, especially if the sink is large, but you shouldn’t do it. While the sinks are often strongly secured to the bottom of the countertops, regularly using the sink as a bathtub can loosen the sink mounting.

According to granite countertop installers Rockville, if your kids are large, they can put a lot of weight on the countertops and crack the striations.

For your countertops to last for a long time, use the sink to only wash the utensils. If you want to wash the kids in a fun way, do it in the bathroom.

30

Mar

How Do I Get The Best Deal On Granite Countertops?

Although granite counters are beautiful and significantly improve the house’s look, they don’t come cheap. Fortunately, you can do several things to get the countertops at a good price. Are you wondering how do I get the best deal on granite countertops? There are plenty of ways, with the most common ones being:

Shop around and compare prices

What do most homeowners do when they are looking to buy granite counters? They visit the first granite shop and make the purchase. In most cases, they do this because they are in a hurry to get things done and move on to the next thing. This is wrong as they often end up spending too much money than they should have.

To save money and get the best deal, take your time and visit different granite stores and see what they offer. Of course, you should only consider buying from a store stocking high-quality stones at a low cost.

You can’t have ample time if you start your research late, so to ensure you have as much time as you need, start scouting for countertops at least 3 months before you embark on your project.

Buy wholesale

When you buy anything wholesale, you save a lot of money, and you should do the same when you are buying granite counters. The cool thing is most granite stores will sell you the countertops at wholesale prices when you are buying many slabs. There are even some stores that will sell you one slab at a wholesale price—you only need to look.

Be flexible with granite color.

One of the prime factors affecting the price of countertops is the color of the slab, where the rare colors cost more than the easier-to-find colors. As you can guess, this means that if you are looking for a specific rare color, you end up paying a premium for your countertops.

To save money and get a perfect deal, you should be flexible in your color choice. The beauty is since granite is natural, it comes in plenty of colors to choose from. If you are in the granite store and find that your desired granite color is expensive than your budget, choose a cheaper color that is close to your color of choice.

Order from a local supplier

While you can buy the granite slabs from anywhere in the world, it’s good you buy them from your local supplier. The reason for this is because the slabs will be cheaper to transport from the local supplier to your home.

Granite slabs are heavy, and if you ship them from a long-distance, they can cost you an arm and a leg, and you don’t want this, do you?

Granite sellers ship their products in bulk, so they don’t spend as much money as you would if you shipped just a few slabs for your kitchen.

To save even more money on transport, ask the seller if they can transport the slabs for you, for free.

Go for granite remnants.

If you are looking for small granite slabs for certain kitchen elements, such as the backsplash behind the stove, don’t spend a lot of money on whole granite slabs. Instead, get granite remnants.

These are small granite chunks that are leftover from previous projects.

Since they are leftover and often too small to fit an entire kitchen, they are cheaper than entire slabs.

When you are in the granite store, ask for the remnants, and you will get them at a low price, which sees you saving a lot of money.

Go with a standard eased edge.

The type of edge you install on your countertops has a significant impact on the overall cost of granite surfaces, so be cautious of the edge you settle on. As a rule of thumb, choose the standard eased edge as it’s much cheaper than the tiered or bevel edge.

Install the countertops by yourself

If you are a dab hand at DIY projects, save money by bypassing granite installers Rockville and installing the countertops by yourself. Of course, ensure that you follow the right procedure when it comes to their installation.

25

Mar

Is Granite Good for Kitchen Countertops?

Granite countertops are one of the most popular countertop materials, and every homeowner wants to install them. The countertops are loved for their beauty and the fact that they give a kitchen a premium look. While this is the case, the big question is, is granite good for kitchen countertops?

Yes, granite is an excellent material for your kitchen countertops. Here are some of the reasons why:

It’s heat resistant

Granite counters won’t melt or blister when exposed to heat. This means you can take a hot pan and place it directly on the countertops without worrying about the surfaces getting damaged. While this is the case, you should note that regular countertop exposure to extreme temperatures can damage them.

This is because, while the countertop is heat resistant, it’s not heatproof.  To protect your surfaces, always have a trivet in place so that when you remove a hot pot or pan from the fire, you don’t place it directly on the countertops. Rather, you place it on the trivet.

It’s scratch-resistant

Granite scores a seven on Moh’s scale of hardness. This means the material is tough and able to resist scratches from different materials. Due to its tough nature, many homeowners cut fruits and vegetables on it. While you can do this without any issue, you should limit it. This is because the vegetables and fruits might be having harmful acids that might etch the surfaces.

Other foods such as meat might be harboring bacteria that you transfer to the surfaces when you place them directly on the countertops. When you place other foods on the counters, you transfer these bacteria to the foods. You don’t want this, do you?

Even if the countertops can take the beating, don’t cut the food directly on the countertops. Instead, always have a cutting board in place at all times.

You can easily hide seams.

If you have a large kitchen, you have to use two or more granite slabs. The biggest worry with most homeowners is that the countertops will show seams that give the surfaces an ugly appeal. When you hire the right contractors to install the countertops, you don’t have to worry about this. Most experienced installers mix custom color epoxy to adhere to the seams, which comes in handy at disguising them.

And as a result, you have a smooth, beautiful surface.

You can repair the countertops.

Most countertop materials need to be replaced when they get damaged. This isn’t the case with granite. When you have a crack or chip on your granite, you need to contact the contractor that installed them and explain the issue. In most cases, the contractor will use a color-matched epoxy to fill the void, and when properly done, it’s invisible. In fact, you can’t tell you have a defect there.

If you have a small chip, you can use superglue to seal the chip.

While the countertops are repairable, you should note that it’s your responsibility to protect them from damage. Of major importance, don’t place heavy cast-iron pans directly into your under-mounted sink. This is because the cutout edges are prone to chips that give your surfaces an ugly appeal.

There are plenty of countertop options to choose from

If you ask many homeowners, they will tell you that granite is white, but this isn’t the case at all. Granite comes in a variety of colors and patterns to choose from. And the beauty is that since the stone is natural, every slab is unique so that you can be sure that when you install the countertop, you can’t find anyone else with an exactly similar one.

If you want your kitchen to have an exotic look, you should install exotic granite colors such as red. While the slabs will be slightly more expensive than the other slabs in the market, you will give your guests something to talk about when they visit you.

They are easy to maintain

Granite countertops are one of the easiest materials to maintain. Once you have had them professionally installed by granite installers Rockville, the only thing you need to do is to clean them once a day. You also should make it a habit to clean any spills as soon as they happen. Also, once a year, seal the countertops to keep off stains.

17

Mar

How to Tell the Difference between Marble and Granite

On first look, marble and granite countertops look similar. Both are natural and porous, which can be confusing to many new homeowners. But are the two similar? Absolutely not.

While the two materials are similar in some aspects, they have their differences. If this is the first time buying the countertops, you need to be cautious, so you don’t buy the wrong one. To help you out, here is a guide on how to tell the difference between marble and granite:

Origin

Both marble and granite are natural, meaning they are both acquired through mining and excavation, but they have a few differences.

After being buried for millions of years, granite is a kind of igneous rock. It’s a byproduct of molten magma that has been seasoned down and solidified for decades. Granite forms after going through periodic heating and cooling, and this makes it hard and durable.

Marble goes through the same formation process as granite, but marble doesn’t involve magma heat. A marble is a combination of sedimentary rocks and other natural elements. It results after years of natural meshing of rock and soil. After being exposed to heat and pressure, you have the natural design of the stone.

During its making, plenty of minerals are involved, so marble tends to come in a wide range of colors. This means as a buyer, you have plenty of designs and colors to choose from.

Cost

Cost is often a deal-breaker when you are buying countertops, with marble being more expensive than granite. You should note that the price of the countertops isn’t only the buying cost. You also need to factor in the cost of installation. You can’t install the countertops by yourself, so you will need to hire a professional to help you out.

The installation technicians have different rates depending on their experience level, insurances, and location. It’s up to you to research and find a contractor that will provide you with great service at the least cost.

When you are operating on a tight budget, avoid hiring uptown companies as they will charge you a premium fee for nothing. You should note that the high fees charged by these companies aren’t a reflection of the services they provide, but rather than the fee they have to charge to stay afloat.

Simultaneously, avoid extremely cheap companies as they are most likely inexperienced and will do a shoddy job. Others will damage your countertops, which can lead to an expensive loss.

As mentioned, you need to do your research and find a company that provides you the sweet balance between cost and experience.

Porosity

As mentioned in the introduction, both marble and granite are porous, meaning that water penetrates the inner layers, putting the countertops at staining risk. While this is the case, marble is more porous, so you need to seal it more often to prevent it from staining.

Despite the high porosity, marble is still compact and sturdy, so it makes a great choice when you are looking to install durable and elegant kitchen countertops.

The marble’s high porosity makes it an ideal candidate for installation in hotter climates due to its ability to repel heat.

Although granite is less porous, you should note that it’s still porous, so you should protect it from oils, wine, condiments, and other materials that can stain the surface.

Aesthetics

For the untrained eye, both marble and granite look the same, but they have several distinct physical attributes that you can pick when you are cautious.

For example, granite has a veiny look that resembles specks on the surface and differs in color, where the different slabs have a variety of hues. Marble, too, has a veiny pattern, but the veins are larger and run through the slab with fairly consistent colors.

Durability and maintenance

For the countertops to last for a long time, you need to ensure they are properly installed by experienced granite installers Rockville or other professionals. Since marble is more porous, it’s more susceptible to stains and spills, so you will need to clean it up and seal it more often.

Granite is less porous, but you will still need to seal it at least once a year to improve its ability to resist stains and spills.

09

Mar

Can Quartz Countertops Be Buffed?

Quartz is known for its tough nature, so when you install it, you have peace of mind that it will last for a long time and effectively handle oil spills, heat, dyes from foods, and beauty products.

To retain the look of the countertop, you need to keep it looking clean and polished. Can quartz countertops be buffed? Yes, they can. In fact, here are some of the ways to polish them.

Scrub the surfaces with soap and warm water

Have you noticed your countertops are losing their shine? You can restore it by scrubbing the surfaces with tough brushes.

Quartz surfaces are fortified and tough, so they will effectively stand up to the scrubbing brushes, so you don’t worry about scratching them during the scrubbing.

The best way to go about it is to use warm, soapy water. Put the water in a spray bottle and use it to soak the quartz. Once the surfaces are wet, scrub them with a sponge, washcloth, or scrub brush of your liking.

Once you are done, use a cloth or squeegee to dry the surface while ensuring you leave no streaks behind. Remember, the wet spots and streaks will tamper with the quartz’s continuity, making the countertops appear messy under some lighting conditions.

Windex and other window cleaners

Windex and similar window cleaners are highly effective at polishing quartz. The same way they shine and increase the clarity of windows, they can bring out the shine in quartz.

When using the cleaners, remember that less is more, so fill a spray bottle with water, then add a small amount of window cleaner, and then apply the cleaner to the counter’s entire surface.

After spraying the countertops, gently dry and polish them with a soft, clean cloth, and within minutes, your countertops will look as good as new.

Quartz polishing products

If you don’t like using water or window cleaner, you can always use specialized quartz polishing products. These cleaning products make sense when you have noticed your countertops getting stained or even getting damaged by the cleaners.

Like the other cleaners, follow the instructions on how to apply and polish the countertops properly. Ensure you give the countertops and surfaces a good cleaning before applying the polishing products.

Tips to avoid staining the countertops

Instead of having to polish the countertops, isn’t it easier to simply prevent the stains from coming about? Here are some of the ways to prevent these stains:

Avoid food spills

Remains from food will cause stains as the food reacts with quartz countertops. Some of the notorious foods known to cause staining include: coffee, tea, red wine, fruit juices, tomato sauce, and fresh berries.

To prevent stains from these foods, avoid placing them directly on your countertops. Always have a trivet or any other protective material in place. You shouldn’t place even fresh fruits such as fresh berries on the countertops as they will most likely stain the surfaces.

If you must have the fruits on the countertops either for the look or to eat them as you are cooking, ensure they are in a bowl.

In the event juice spills or any other types of spills happen, move with haste and remove them before they react with the quartz and cause an off-putting stain.

Use the right cleaning products.

Did you know the products you are using to clean the countertops can affect your countertops’ look? If you are using paint thinners, oil soaps, detergents, and other products, they might be reacting with your surfaces, leaving dark or dull spots.

To bring the staining to a stop, use the right cleaning products. For example, use cleaning products specifically designed for quartz.

Bleach

When your countertops are damaged by bleach, they tend to have lighter or white spots. Bleach etches the surface, leaving its mark like marble etching. To prevent your countertops from being damaged by bleach, don’t use it directly on your countertops.

Heat or burns

Although quartz kitchen countertops Potomac are heat resistant, they are prone to heat damage. Your countertops are bound to be affected by heat when you place a hot item on them. So to prevent staining, avoid placing the hot pot directly on the countertop surface.

26

Feb

How to Protect Granite Countertops

Every homeowner wants their countertops to last for as long as possible. And do you know what? It’s possible to do it. To help you out, here are tips on how to protect granite countertops:

Seal the countertops

This is a no brainer. In fact, this is the first thing people think about when they think about protecting their granite. Since granite is porous, it’s paramount that you protect it from stains by sealing it.

To do it, seal the surfaces immediately after installation, then at least once a year thereafter. For best results, use a high-quality sealant. An expert should do the sealing work.

Clean the surfaces regularly

You might have the impression that cleaning the countertops is an aesthetic issue, but this isn’t the case. Cleaning the countertops is a protective measure. When you regularly clean your countertops, you remove dirt and other materials that can scratch the surfaces.

The good thing is, you don’t have to be fancy about granite cleaning. Wiping the surfaces with a damp, soft cloth and some soap is enough. Wait for the surfaces to dry, then buff them as much as you can.

Cleaning the countertops is essential, but you will be doing more harm than good when you use the wrong cleaning products. To keep your countertops in top shape, use non-abrasive cleaners. To be even in a better place, use cleaners specially designed for granite surfaces.

As you prepare the meals or have a good time with your friends, it’s common for spills to happen. For example, juice or even water can spill on the countertops. When an accident happens, move with haste and get rid of the spills as soon as possible.

Although your countertops are sealed, letting large amounts of liquids stay on the surfaces for long is inviting disaster as the liquids can seep into the stone’s deeper layers and become hard to remove.

Protect your surfaces from extreme heat

It’s no doubt that granite is tough and can withstand a lot of heat, but it’s not heatproof. This means you will damage the countertops when you repeatedly expose them to a lot of heat.

Thankfully, you can prevent this from happening by placing your hot pots on hot pads, trivets and other protective items.

Even when taking hot coffee, don’t assume your countertops are tough and will take the heat. Have a coaster under the cups at all times.

Don’t sit on the countertops.

When you look at the countertops, they appear solid and extremely strong that many homeowners are tempted to sit or even stand on them. Don’t do this.

Despite the tough appearance, granite is brittle, especially on the edges, so when you exert a lot of pressure there, you risk breaking it.

To avoid this, don’t sit on the countertops when you are in the kitchen. You also shouldn’t step on the surfaces to reach the top shelves or replace the bulb. Instead, use a ladder.

If you often have people with you in the kitchen, have a few seats in place, so they aren’t inclined to sit on the countertops.

Ensure the countertops are installed by an experienced professional

You may be wondering what granite installation got to do with its protection, but the two go hand in hand. When your countertops are poorly installed, they are more likely to break or even fall from the cabinets and get damaged.

To avoid this, ensure your countertops are installed by experienced and certified granite installers Rockville.

The beauty of it is that it’s easy to find these contractors—you only need to be patient and strategic when doing it. The first place to ask is your friends and relatives. If none has recently worked with a contractor, try it online.

Do a Google search and interview the potential technicians that you find. Many people hire the first contractor that shows up first in the search results. Don’t do this as ranking first on Google isn’t proof they will provide a good service.

The key to finding the ideal contractor is to not be in a hurry. Have several interviews with the technicians and settle with the most experienced.

It also doesn’t hurt working with a contractor with a great personality.

14

Feb

Do I Need Plywood under Granite Countertops?

If you are asking, do I need plywood under granite countertops? You must be thinking about installing granite in your home, but aren’t sure whether also budget for plywood, right?

Well, you need plywood if your granite slab is less than 3cm thick. You should note that you will still need support in certain situations, even if your countertops are more than 3cm thick. These situations include:

Over the dishwasher.

The dishwasher opening has an opening that goes completely unsupported since there is no cabinet for it to rest on. The plywood support will provide the granite counters with the support it needs.

Besides the support, it’s wise you ask the contractor to install mesh under the countertop at the dishwasher location for additional support.

Bartop overhang

The bar top overhang creates an unbalanced loading condition, so if someone puts weight on the edge of the countertop, it will rotate in the force’s direction. It’s for this reason that you will need additional support for the cantilevered portion of your granite.

Even if the contractor installs mesh under the cantilevered portion of your countertop, the support isn’t enough to provide you with the amazing support you are looking for. For maximum support, install plywood.

Why use plywood to support natural stone?

While it might seem silly to support a stone with wood, it actually makes sense. For once, plywood is durable, while granite is fragile, especially if the slab is thin. This means that the piece of plywood will provide you with the support you are looking for.

Plywood is also inexpensive compared to solid hardwoods. This means you can provide support to your countertops without breaking the bank.

If you were to use stones instead of plywood, you would have to use multiple stones to join the pieces together, which will leave unsightly seams on the countertops. On the other hand, installing plywood means you have a smooth and seamless countertop that you can be proud to show off.

Are there other granite countertop support options?

If you don’t like securing your countertops with plywood or you have no access to it, don’t worry as there are plenty of other options you can go with. These options include:

Corbels

A corbel is a support where the back attaches vertically to the cabinet or wall, and the top acts as the support where you can rest other objects on. Corbels are similar to L-shaped brackets, but they are made as solid 3D objects designed to be seen.

The cool thing is, unlike brackets, corbels are designed to be both aesthetically appealing and functional. Since they leave space for your legs, corbels are perfect supports for a bar top overhang.

Poles

Poles are as simple as they sound. They come straight up from the floor, providing support to the underside of the countertop. Poles make an excellent choice when you are planning to install a large overhang.

While poles are great, provide additional support by installing some subtop, such as plywood or wire mesh.

Brackets

Brackets are like corbels, but they are designed not to be seen. A good example of the hidden countertop bracket is the L-shaped bracket. Brackets work like corbels where you mount them vertically to the cabinets, having a space on top to support the counter.

After installation, there is nothing between the bracket’s top and back, making them almost invisible.

Another popular bracket is the knee wall bracket that is straight and often mounted horizontally into a knee wall. For those wondering what a knee wall is, it’s a short wall that doesn’t extend all the way from the floor to the ceiling.

During installation, you cut holes into the wood underneath where you are planning to install your countertops, then install the metal sheets straight into the wood to support the countertop overhang’s weight.

Work with a professional

Regardless of the type of support you are using on your countertops, ensure the installation is done by a professional granite contractor Rockville. The last thing you want is to hire a novice that botches your expensive countertops.

06

Feb

Granite Installation Process: Steps To Follow When Installing Granite Countertops

Granite countertops come with plenty of perks. They transform your kitchen, they are durable, among many other things. If you want to install the countertops in your home, there are two ways you can go about it: hire granite installers or do it yourself.

If you are a dab hand at DIY projects, you can do the work yourself and by so doing you save money and install the countertops in your preferred manner. Is this your first time installing the countertops? Here is the granite installation process you should follow:

Get the right measurements

Begin with determining the size and shape of granite you need to complete your project. A great way to do it is to use craft paper or cardboard to create a template that you will visit the granite stores with.

Trace around the existing countertops and cut away any excess material to make an exact template. When doing it, mark any spots where you will need cuts such as the sink.

Don’t be in a hurry when taking the measurements. Take your time to ensure you get precise measurements.

After knowing the size of the granite you need, the next thing is to determine the size of the overhang you want for your countertops. An ideal granite overhang should be 1.5 inches. Avoid an overhang larger than this, as it will require you to install steel braces to support it.

The braces are complex to install and will eat up on your budget.

After taking the measurements, adjust your template to include the additional measurements of the kitchen overhang.

With the measurements in place, now head to the stores and choose the granite you want for your home. Granite is natural, so it comes in different colors and designs. It’s up to you to choose the right one for your home.

When making the purchase, avoid buying from the big box stores as they sell their products at inflated prices and often don’t have a wide selection of slabs to choose from.

Before you make the commitment to buy large slabs, first take a piece of the slab with you at home and see how it blends with the rest of the house. Only buy a larger slab if you like how the slab looks in your house.

Prepare the surfaces for installation

Now that you have your desired slab, now it’s time to install it on your surfaces. Unfortunately, you can’t install it on dirty surfaces so the first thing to do is to clean your countertops so they are free of grease, oil, dirt, and other materials.

If you had installed countertops before, remove them so you have a clean surface to work with.

Once the countertops are clean, put down plywood for the granite counters to rest on. For best results, ensure the plywood has the same measurements as the template.

Attach the plywood to the countertop cabinets and secure them with screws. Also, waterproof the plywood to keep it from swelling when it comes into contact with water.

Lay the granite slab

Lay the granite slab in place. In most cases, you will need one slab, but if your kitchen is large, you may need to lay several pieces. If this is the case, epoxy the seams to cement the pieces together. You should then use a razor blade to skim off any excess epoxy that might be left behind.

You should then secure the granite slab to the cabinets using bond block attachments. This is to keep the granite from moving around or shifting during normal usage.

If you have a special cooktop or sinkhole, you may need to make additional cuts. Use a wet saw to accomplish this.

Install the sink and cooktop

After making the cuts, install the sink and cooktop. Place the sink in the cut and ensure it fits properly. To secure it in place, use a bead of caulk around the sink edge where the sink rests on the granite.

It’s also wise to apply a bead caulk around the underside of the sink.

Finish the countertop

To complete the look, remove any caulk, dust, or epoxy on the countertops. You also should clean the counters and seal them.

The duration of the granite installation process depends on the size and complexity of the job. For a small project, it can take you 2-3 hours, but larger and more complex projects can last for up to 7 hours.

You save money and have an easy time customizing the countertops to your liking when you install the countertops by yourself, but if you find it complex or you don’t have the skills, let a granite contractor Rockville help you out.

31

Jan

7 Excellent Kitchen Countertop Cover-Ups

Don’t like the current look of your countertops? Don’t rush to hire countertop replacement services providers, as there are several ways you can cover your countertops without requiring contractor services. To help you out, here 7 excellent kitchen countertop cover-ups:

Tile the countertops

Tiles are excellent at covering floors, walls, and showers, and there is no reason you shouldn’t use them to cover up your old countertops. When choosing the tiles, go for glazed ceramic and porcelain tiles as they are the most stain and heat resistant.

They also come in a wide range of sizes, shapes, and colors. Avoid natural stone tile as it requires periodic sealing that can be too much work on your part.

You can install the tiles directly on your countertops without removing the old countertops. You only need to ensure the tiles are flat and stable enough to prevent the new tiles from cracking.

As you are installing the tiles, you should note that while tiles are durable and easy to maintain, the grout joints are prone to staining. To minimize the stains, seal the countertops as soon as possible after installing the tile. You should then apply the sealer every few years to maintain the protective barrier.

Lay laminate over the countertops

If you have old laminate countertops with square edges, you can cover them with a new laminate layer. The layers are sold in sheets of up to 5 feet wide and 12 feet long, and all you need to do is to visit your local store and place your order.

If your countertops have raised and rounded edges, often known as waterfall edges, you can’t cover them with new laminate surfaces as the new material can’t conform to the edge contours.

Use a countertop refinishing kit.

Refinishing kits have everything you need to cover your countertops. The refinishing kits include an epoxy-like paint and decorative stone chips that create the natural stone look.

To cover your countertops using the kit, you simply need to follow the kit’s instructions. While this method is highly effective, you should note that it involves a lot of hard work, it’s messy, and you need to pay close attention to the kit’s details.

Cover your countertops with wood

Have you always wanted butcher block, or are you drawn to the beauty of real wood countertops? You can cover your old, beaten countertops with wide planks of solid hardwood. You can even get creative and use a blend of hardwood and bamboo plywood.

The cool thing with hardwood is it’s more durable and repairable than plywood. Only plywood comes in larger pieces and is more affordable.

Bamboo plywood offers the best of both worlds. It has a thicker top layer that ensures it’s durable and easy to repair and at the same time comes in 4 x 8-foot sheets like regular plywood.

You should note that covering your countertops with hardwood requires woodworking skills and the right tools. You can do the work by yourself if you have the skills or hire a professional to help you out.

Install modular granite

Also known as granite or stone overlay, modular granite is a system of small thin stone slabs designed to cover old countertops. The stones are 16 by 18 inches wide, which means there are fewer joints between the pieces.

For the problematic inside and outside corners, there are special pieces made for these sections, as well as the optional edge pieces.

Cover the countertops with film

Countertop film is thicker than shelf or contact paper. Many people refer to it as a cross between vinyl flooring and shelf paper and have a self-adhesive backing for sticking directly to the old countertop surface.

To install the film, layout the film, trim it to a rough size, and align it to the countertop edges. You should then stick it down using a squeegee tool to remove the air bubbles.

While the film will cover your ugly surfaces, you should note that it’s not a long-term solution, so use it as a temporary way of covering your surfaces.

Paint the countertops

Painting your countertops is easy, fast, and gives you immediate results. You can also do it by yourself without involving granite contractors Rockville or other professionals.