07

Dec

How Much Do Granite Countertops Cost?

If you are asking how much do granite countertops cost, you must be looking to renovate your bathroom or kitchen and not sure how much to budget for it. As much as we would like to give you a definite answer to this question, the unfortunate thing is the price of the slabs varies depending on plenty of factors that include:

Source of the stone

Ask most homeowners where to buy the granite counters, and the first thing that comes to their minds is the big box stores. While the stores are large and popular, they often don’t have plenty of countertop slab options to choose from. The stores also tend to be more expensive, with most of them charging up to 40% more than specialist stores.

These big-box stores also often outsource the fabrication and installation work making the installation process too expensive.

To save money and get many countertop options to choose from, buy your countertops from the countertop specialists. These professionals have staff, skills, and the necessary equipment, making them a one stop shop.

When you visit these stores, you get top quality unique slabs at a lower cost, and you have expert contractors ready to install the countertops for you expertly.

Thickness

Most of the granite slabs vary between 2 cm and 3 cm. As you can guess, the thicker slabs are more expensive than, the thinner ones. This means you can buy many thinner countertops than thicker ones.

Unfortunately, the thinner slabs require a lot of support and easily break especially when you place them over a large area.

Rarelity of the colors

Although most homeowners install white countertops, granite slabs come in all shades of colors where the rare and exotic colors such as red, blue, and black tend to be more expensive than the standard hues.

Cut

Most people associate granite with long slabs of stone, but these are just the most desirable cut for the kitchen countertops. Manufacturers cut granite in many ways, including tiles, modules, and many others.

Slabs are the most popular, followed by modules, then tiles, where the only advantage granite slabs have over modules is that slabs look better as they require fewer seams hence presenting a smoother, sleeker look.

The modules and tiles might seem less durable than slabs, but this isn’t the case. Remember, they are made from granite.

If operating on a tight budget, go for tiles that also work excellently for backsplashes.

Granite quality grades

Granite comes in different grades defined by pits, veins, colors, soft material content, marks, thickness, and the quarry. While there are many grades, we can summarize them into three primary levels:

Level 1: The low level or entry-level granite is also known as the commercial-grade or the “builder’s grade,” often from china.

Level 2: This is the mid-grade level that is more unique than level 1, and it’s often from Brazil and India.

Level 3: Also known as the high-level grade, it’s the finest quality and comes from India and Brazil.

Obviously, level 3 is the most expensive as it focuses on the quality of the stone.

Demand and supply

Like any other product in the market, the granite countertops’ price is affected by the demand and supply forces. If you buy the slabs when they are in high demand, you will pay more for them than when another person would buy when the demand is lower.

Finishes

Most countertop specialists give the countertops a glossy or polished finish, and in rare cases, they will give it a matte finish. These are the most popular granite finishes, and when you buy them, you won’t pay extra for them.

Unfortunately, if you choose another finish, such as hammered or leathered, you will have to pay an extra fee as the finish is out of the ordinary.

Can you save on your countertops?

The good news is you can save on your countertops. One way is to be more flexible on the countertop’s color, size, grade, and texture. You also should be cautious of the store you buy from.

To avoid costly mistakes, hire expert granite installers Rockville to handle the installations. The professionals will help you with the installations and guide you into buying the right slabs for your home.

29

Nov

How Much Weight Can You Put On Granite Countertops?

If you are asking, how much weight can you put on granite countertops? You must be thinking about standing or sitting on your countertops and unsure whether your countertops will take the weight, right?

Granite is fairly thick, often at the very least ¾ of an inch. If the weight is evenly distributed over a large area, the countertops can hold up to 1000 pounds.

If you are planning on standing on the countertops either to change the lights or reach to the top shelf, you most likely won’t have your weight evenly distributed, which increases the chances of damaging the countertops, especially if your countertops have a weak point or small fissures.

While granite is tough and can handle a lot of weight, granite technicians highly discourage sitting or standing on them. If you have to stand or sit on the countertops, place sturdy plywood on the counters where you will now stand or sit on.

The plywood will help distribute the weight over a large area reducing the chances of caving in the countertops with your weight. To avoid splinters, wear shoes.

Besides sitting or standing on the countertops, there are plenty of other things you should avoid doing to maintain your countertops in top shape. They include:

Placing kids in the sink

If you have a double sink, it might seem cute having your little one there as you are cleaning the dishes but don’t do it. Sinks are often the countertops’ weakest areas, and having your three or four-year-old there you will be damaging your precious countertops.

If you enjoy cleaning the dishes or preparing your meals with the kids in the kitchen, bring them seats to sit on the kitchen island as you go about your duties.

Allowing a lot of sun in the kitchen

Every homeowner wants a well-lit kitchen, and there is nothing wrong with this, but allowing a lot of direct sunlight in the kitchen can cause your countertops to fade. Sunlight can also fade some of the sealants you used on your countertops, giving your surfaces a cheap look.

To avoid this, pull down the shades during the peak daylight hours.

Preparing food in the same area

Do you prepare food in the same spot all the time? Over time, the area suffers from etches, scratches, and other signs of wear and tear.

It’s normal to have a favorite food preparation area, but don’t be too attached to it.

Now and then, prepare your food in different areas of the counter. Who knows, you might even discover a new favorite area you never knew existed?

Placing hot pots and pans on the countertop

Granite is a natural stone, so it has a tough look but don’t fall for it. Placing a hot pan directly on it will cause cracking and discoloration. In some cases, you destroy the granite slab to the extent you have to replace it.

To keep your surfaces in good condition, make it a habit to use potholders and trivets to serve as barriers to avoid burning the surfaces.

Leaning on the edges

What happens when you are preparing your meals with your better half in the kitchen? If there are no chairs in the room, they often lean on the edges, isn’t it? This is wrong as, just like standing or sitting, you put extra pressure on the counters, increasing their chances of getting damaged especially if there are fault lines.

As you should avoid sitting, you should definitely avoid opening a beer bottle on the counters.

Dicing directly on the countertops

The same way homeowners think they can place hot items on the countertops and get away with it is the same way they think they can chop directly on the granite kitchen countertops Rockville and cause no harm.

Oh boy, how wrong are they? When you cut directly on the surfaces, you cause fine scratches that can disrupt the waterproof sealant on the countertops, making them more susceptible to damage.

To maintain your countertops in top condition, always use a cutting board whenever you are chopping, slicing, or dicing.

15

Nov

6 Steps On How To Polish Granite Countertops

Polished granite gives your kitchen a sleek, subtle look. Unfortunately, polished countertops are expensive hence not many homeowners can afford them. Luckily, you can install rough countertops then polish them later on. Interested in learning how to polish granite countertops? Here are the steps to follow:

Step 1: Clean the countertops

Everything begins here as you can’t polish dirty countertops. Thankfully, cleaning the countertops is easy. You need warm water and a mild detergent. Mix the two, then apply them on the surfaces using a soft cloth.

Once you are done with cleaning, dry the surfaces with a microfiber cloth. You should never leave the surfaces wet or damp as you put the surfaces at the risk of staining.

Step 2: Make or buy the polish.

You can get the polish in two ways: you can make it or buy it. To make the polish, get a small bowl, baking soda, warm water, and fork. Mix 3 parts baking soda and 1 part water until you get a smooth thick paste. Ensure the paste is smooth before using it.

If you aren’t a dab hand at DIY projects or you don’t want to go through the trouble of making your own polish, buy the polish from your local retail store. When making the purchase, ensure the polish is suitable for granite. As a rule of thumb, avoid general-purpose polishing products as they have been shown to damage granite.

Step 3: Apply polish.

Once you have your polish, your next step should be to apply the polish on your countertops. Place a thin, even coating of the paste on the surfaces. If using baking soda paste, place small dollops of it across the countertops using a spoon.

If using retail granite polish, spray it lightly over your countertops and let it sit there for at least 2 minutes.

Step 4: Buff the countertops

After applying the polish, use a clean, soft cloth and work the polish into the granite. Start from one corner and work your way evenly over the countertop. Rub the polish into the countertops in small circles, making sure you buff the edges as well.

You should note that you should always use a soft cloth for buffing as using a more abrasive cloth will scratch the granite and damage it.

Step 6: Wipe off excess polish

It’s normal to have an excess polish, and the excess streaks can easily ruin the polished surface’s appearance. To remove the excess polish, use a soft cloth and dampen it lightly with warm water.

Use the cloth to wipe down your countertop and eliminate any remaining baking soda paste or retail granite polish.

If you find excess water on the countertops after wiping it down, dry it off using another cloth.

In most cases, your countertops will polish up nicely, but if your countertops have deep scratches, the above remedies won’t get the work done. In such a case, you have no way out other than to hire a professional to polish the surfaces for you.

The professionals use specialized tools, and they can either wet or dry polish the countertops.

Tips on retaining the shine

Polishing the countertops isn’t enough—you need to take care of them to retain the shine. How do you do this? Here are tips for doing it:

Clean spills as soon as they happen: Leaving liquids on the countertops for a long time causes the granite to develop dark, shadow-like marks that mess with the countertops’ look.

You should note that even bright-colored beverages can stain the countertops, so don’t take any risk. As soon as there are spills on the countertops, get rid of them. When wiping the spills, use a soft cloth as a rough one will damage them.

Buff the countertops: To create a nice shine and temporarily reduce the staining risk, buff the countertops with cooking oil. To do it, apply cooking oil to a clean cloth, then make circular motions across the surface. For best results, granite contractors Potomac recommend you do this periodically, such as daily or once a week.

It doesn’t matter the type of oil you use. You can use olive oil, vegetable oil, or even avocado oil. It’s all up to you.

07

Nov

6 Tips On How To Prepare Cabinets For Granite Countertops

So, you have settled on granite? Good choice. But before you place your newly selected countertops in their assigned area, you have to ensure the space is ready for the new guest. How do you do this? Here are tips on how to prepare cabinets for granite countertops:

Remove the old countertops.

If you are replacing the countertops, you must first remove the old countertops before installing new ones. Start with removing the seal anchoring the countertops to the wall using a knife or any other sharp object.

Depending on the countertops, you may be having screws anchoring the old counters to cabinets. The screws will most likely be underneath, so look them there and remove them if present.

Once the screws are off, it’s time to remove the old countertop.

If the house is new and you are installing the countertops for the first time, the only thing you need to do is to ensure the cabinets are in good condition and level. Place a flat slab on top of them, and it should contact the cabinets in all areas.

If the cabinets aren’t level, you have a reason to worry as installing granite countertops will create pressure points that increase the chances of the countertops breaking.

Level the surfaces

To ensure your countertops have a long life, work on leveling the surfaces. One of the things you can do is to place shims under the cabinets to level the tops. You can also place plywood over the cabinets and place shims underneath the plywood.

You should note that placing plywood over the countertops will add height to the cabinets. Before installing the countertops, ask yourself whether you are comfortable with the added height.

Have enough supports

Granite is heavy, so you shouldn’t have large portions of it hanging over thin air. In areas where the countertops don’t have cabinets to rest on, add supports. There are plenty of materials you can use for this. Consult your contractor.

Remove plumbing

If you already put the plumbing systems in place, you may have to remove them as they often get in the way during installation. Over the years, we have seen homeowners removing the faucets and other plumbing appliances without first turning off the water.

Don’t do this as it often creates a huge mess that takes a lot of time to clear. Sometimes the water causes serious cabinet damage that you have to hire a contractor to help you fix them.

To be safe, turn off the water before you remove any plumbing appliance.

If installing the countertops for the first time, you obviously don’t have sinks or faucets in place. So have them delivered and be ready for installation to make it easy for installers to make a template to the sink’s exact specifications, so you have a perfect installation.

The same thing goes for faucets. If the granite installers have to cut space for them, they need to be on the site at least a day before installation.

Remove the dishes from the cabinets.

If you are like other homeowners, you don’t want your dishes exposed to the chaos of countertop installation so remove them before the installation process begins. Of course, you should place them in a different room.

If you have many dishes and don’t want to go through the trouble of removing them, then returning them, cover the top drawers with a protective sheet to protect them from dust and other debris.

Be present on the day of installation.

Even if everything is in order, you may still have to make last-minute decisions. For example, if you don’t want a lot of sink to show, you have to ask the granite contractor Rockville to move the granite edge flush with the wall of your kitchen sink.

If you don’t mind the top flange of the sink showing, let the contractor know about this to make the necessary adjustments.

The other decision you need to make is the location of the seams. Even if you bought the largest granite slabs, you have to deal with seams as long as your kitchen is large. Discuss with the contractor about the location of the seams. For an even and beautiful look, aim to hide the seams as much as possible.

31

Oct

How To Shop For Granite Countertops

Granite always delivers: It brings exclusivity, adds a touch of elegance, and improves the value of your home. To get the most from it, you have to buy the right one. Not sure how to go about it? Here are tips on how to shop for granite countertops:

Know what you want

You can’t buy any slab you come across—you need to know what you want and what will look the best for your home. Remember, granite comes in a wide array of colors and patterns. It also comes in plenty of edges, with the most common edges being: square, rough, bullnose, and rounded.

You also need to know the size of the countertop you need. This will require you to take a tape measure and measure the number of square feet of surface area you need. As you take the measurements, remember to include edge allowances, overhangs, backsplashes, seam allowances, and other things.

If you aren’t sure about the right countertop that will look the best for your home, get a professional’s input. The technician will even help you choose the right shape of slab, the right size, the appropriate slab thickness, and many other things.

Once you know what you want, start visiting different countertop and home improvement stores asking for quotes. Most companies will give you a free quote, and all you need is to compare the quotes and settle on the most sensible.

While the cheapest quote might be attractive, be cautious about it as the contractors might be selling substandard products.

Simultaneously, avoid extremely priced countertops as the company might be trying to rip you off.

Don’t buy the slabs countertops.

While online shopping is convenient, you shouldn’t buy the countertop slabs online. This is because a slab might be looking good in the store photos, but have a completely different look in your kitchen or bathroom, often due to lighting.

When looking to buy granite, the best way to go about it is by visiting the local showroom and physically inspecting each granite slab. Even after inspecting the slab at the store, don’t make the final commitment to buy the slab.

Take a sample of the slab to your home and see how it looks on your surfaces. If you like the look, go ahead and make the purchase.

Pay attention to the seams.

Seams make it easy to join different countertop slabs, but they can also mess with the counters’ look. If you have to use more than one slab, you have to deal with seams. The seams’ quality will vary depending on the length and width of the cabinets, the actual physical size of the slab, and access to the property.

To ensure your property doesn’t have ugly seams, work with experienced contractors who will help you minimize the number of seams in your countertops. They do this by ensuring they work with whole slabs as much as possible.

Before installing the countertops, enquire from the contractors where the seams will be located and how visible they will.  This will ensure everyone is on the same page, and there are no surprises once you have installed the countertops.

Invest in a good thickness

Thin countertop slabs are not only cheap-looking, but they also don’t hold a lot of weight. When you are at the store, always go for a thick slab. Thankfully, you can tell how thick a slab is by looking at it.

Other than thickness, also touch the slab. If it feels weak or has an abnormal texture, stay away from it.

Work with a professional

Buying the right countertops is one thing and an entire ball game to properly install the countertops. Unless you are a dab hand at DIY projects, you should let granite installers Rockville handle the installation.

As you are hiring, ensure the contractor knows geometry. This knowledge will come in handy at ensuring you have as few seams as possible. To find such a professional, take your time and ask them as many questions as possible before hiring.

After installing the countertops, remember to take good care of them. As a rule of thumb, avoid placing hot items or weighty items directly on the surfaces. You also should avoid cleaning the surfaces with vinegar and other tough products that can etch the surfaces.

17

Oct

How Do I Calculate How Much Granite Countertops I Need?

How do I calculate how much granite I need? Is a common question you will hear from homeowners looking to install granite countertops for the first time.

Granite is sold in square footage so what you need to do to determine the amount of granite you need is to find out the overall square footage of your countertop area.

How do you do this? Here is a guide on how to go about it:

How to calculate the amount of granite you need

  1. Measure the length of your countertops along the wall, taking the measurements in inches. The measurements should include the one-inch overhang for any countertop edge that isn’t against the wall.

If the counter is broken up into sections due to the presence of an oven or sink, subtract the occupied space from the overall length.

Measure the width of the countertop beginning from the wall, extending outward to the front of the countertop.

Multiply the length of the countertop by the countertop width. The resulting number is the area of the countertop in square inches.

2. Measure the height of your backsplashes. The measurement should reach from the countertop surfaces to the top of the backsplash.

Multiply the length of the countertop to the height of the backsplash to get the area of your backsplash.

Add the area of the backsplash to the area of the countertop, and the resulting number is the total amount of granite you need expressed in square inches.

3. Finally, convert these results to square feet. To do this, divide the number of square inches by 144.

If this is your first time buying the countertops, you should know that granite comes in slabs, and chances are your measurements won’t exactly match the available sizes of your granite slab.

The good thing is most countertop sellers will only charge you for the section of the slab you use.

What should you look for when buying a granite slab?

Thickness

You want a thick countertop that won’t break when you install it. Avoid the popular ¾ inch countertops as they are fragile and often require laminate edges and supports. While they are affordable to install, they don’t last long enough, and you have to replace them more often.

For best results, buy 1-inch countertops. While they will be more expensive to buy, they will give you a long service making them affordable in the long run.

Cracks and natural pits

Most hairline cracks and pits are natural and add natural beauty to your countertops, and you have nothing to worry about when you see them. Unfortunately, sometimes the cracks are too deep, which compromises the integrity of the countertops, especially if your countertops are less than 1 inch thick.

At the time of purchase, carefully go through the countertops, and if you notice an imperfection, ask the stone seller or fabricator how it affects the stone and how it can cause harm.

Seams

If you have the money, opt for seamless granite slabs as they tend to look better. While the seamed countertops look good at the time of purchase, it’s not the case five or ten years down the line.

Edges

To have an easy time installing the countertops, get a custom-designed edge that will fit your cabinet detail. Most fabricators won’t customize the edges, so you need to visit different stores and ask them whether they are willing to customize them for you.

If, on the other hand, the standard edges are okay with you, go with bevel edges.

Installing the countertops

After buying the countertops, the next step should be to install them. If you have the skills, you can install the countertops by yourself, but for best results, let experienced, and certified granite installers Rockville handle it.

You should note you have to seal the countertops at the time of installation to prevent them from staining and getting damaged. For best results, use a high-quality sealer. Most manufacturers tend to seal their countertops, and you don’t want to waste money resealing them.

Before installing the countertops, first test whether they are properly sealed. You do this by pouring water on the slabs. If the area darkens, you need to seal the surfaces.

09

Oct

Is Quartz Cheaper Than Granite Countertops?

Quartz and granite countertops are two of the most popular countertop materials. Since both are premium, high dollar materials, most homeowners can’t tell which to go for, so you will often hear them asking, is quartz cheaper than granite?

It’s hard to tell whether quartz is cheaper than granite as the price of each depends on plenty of factors such as:

Color: Rare colors will be more expensive than popular colors. For example, since granite is manufactured from natural stone, some colors will be hard to find hence more costly. Quartz is engineered so it can be made to mimic these colors, making it relatively less expensive.

Thickness: Of course, thicker slabs will be much costlier regardless of the material you are using.

Source and shipping cost: Where you are getting the materials will significantly affect the price of the countertops. For example, if getting the stones from China, they will be relatively cheaper than if getting them from Italy.

Since you have to ship both granite and quartz from overseas, their prices will be dependent on petroleum prices, tariffs, and other factors.

Installation: The final factor that will affect the cost of the countertops is their cost of installation. Some contractors will charge more than others. To avoid paying hefty amounts on your countertops, take time to research, and ensure you pay the correct amount for the pieces and their installation.

Other ways the countertops compare

Other than the cost issue, there are plenty of ways in which the countertops vary. This includes:

Composition

For those that don’t know, granite is purely natural as it comes directly from stone quarries then cut into thin slabs that are polished and fabricated into countertops.

Quartz countertops, on the other hand, are engineered stones containing large percentages of natural quartz but may also include other minerals. The slabs aren’t from quarried stone but rather from stone byproducts that are ground up and formed into slabs for countertops and other products.

Appearance

Since granite is natural, it tends to have a unique pattern and color that gives your home a unique, enticing appearance. Quartz, on the other hand, is more uniform in appearance, although you will find some pieces with unique colors and patterns, including some pieces that resemble granite in all ways.

The countertop you choose is solely dependent on your preference. If looking to give your surfaces a unique look, go with granite countertops.

Radon emissions

Although quartz is engineered, it’s good to note that it’s made from natural products (93%) with the remainder being color pigments and polymer resins that bond the materials together. Granite countertops are made from 100% stone, and they need to be quarried out of the earth.

Around 2008, there was media-induced fear regarding radon emissions from granite. Studies have shown that little or no radon is emitted from granite or engineered stone countertops, so you don’t have to worry about radiation when installing either of the countertops.

DIY installation

Unless you have a small project, you should avoid attempting to install the countertops by yourself. Both granite and quartz are extremely heavy materials and need expert skills to install them properly. If you are spending top dollar to buy high-quality materials, it doesn’t make sense risking installing the countertops and damaging them.

For proper installation and peace of mind, you won’t have to replace the pieces after a few years, let expert countertop technicians handle the installation.

Maintenance

Both granite and quartz are tough and durable materials, so there is no doubt that when you properly install them and take good care of them, they will give you a long service.

When it comes to maintenance, granite is porous, so it needs sealing to prevent it from staining. Granite also tends to have cracks and fissures that can be a source of weakness.

Quartz, on the other hand, doesn’t require any sealing, thanks to resins used in the fabrication of the slab. The material is also uniform throughout, so you don’t worry about it cracking after hiring an expensive quartz countertop installer Potomac to install the pieces.

30

Sep

Why Is Marble So Popular And Not Granite Countertops?

With so many kitchen countertop options available such as quartz and granite countertops, when you mention countertops, the first thing that comes to the minds of most homeowners is marble. You must be wondering, why is marble so popular? There are plenty of reasons for this.

Humble beginnings

Before we go into details as to why marble is so popular, we need to go back down memory lane and first understand the history of the stone.

Marble was first used by the ancient Greeks, who used it to construct fireplaces, walls, fountains, kitchen hoods, and many other structures. Some of the notable masterpieces include: the Pantheon, Pisa Cathedral, the Taj Mahal, and Lincoln Memorial.

Why marble is so popular

Marble has plenty of attractive features that make it popular. These features include:

It’s durable

The main reason you will find marble in structures that have been around for centuries is because it’s exceptionally durable and resilient. When properly installed, it won’t chip or dent. When you install it in your kitchen or bathroom, you don’t worry about damaging it when you drop something on it or run into it.

On first look, marble appears fragile, but this isn’t the case. After all, some buildings are still standing centuries after construction.

Marble significantly improves your home value.

When you were scouting for a house, what impression did you have when the real estate agent told you the counters were made from marble? I’m sure you had the impression the house is a high-end property, right? This is what marble does to every home.

The premium stone not only gives you a sense of prestige, it also increases the value of your home. So if you are looking to sell the house at a later date, you sell it at a higher price.

Marble is beautiful

One of the reasons marble was used even in ancient buildings is due to its beauty. Marble comes in a wide array of colors and hues from which you will find one that will fit your décor and home design. If looking to give your house a sense of space, there are white countertops to go for.

If you have a large kitchen and looking to give the impression of elegance, go with one of the many dark options. You only need to ensure a professional undertakes marble countertop installation.

The countertops are easy to maintain

In addition to significantly improving your home value, marble is extremely easy to maintain. To clean it, you need to use mild soap and water. Use a soft cloth to wipe it down. If you have sealed the surfaces, you don’t need to scrub sticky spills. Wipe them as they happen.

Guide to buying marble countertops

Now that we have learned why marble is popular and the ways it can benefit your property, now let’s look at how to buy the ideal slab for your home. You need to consider plenty of factors such as:

Veining patterns

Different quarries have different ways of cutting marble that gives the stone different veining patterns. Some of the ways to cut the stone include: fleuri cut, crosscut, and many others. When making the purchase, carefully consider these patterns and only buy a stone that complements your home.

Cracks and fissures

You need to know the difference between cracks and fissures. Cracks are often large, and they are a sign the slab has been dropped or improperly handled. Don’t buy a slab with cracks on it.

Fissures, on the other hand, are small and natural. They aren’t a sign of a deformity, and there is no harm in buying a stone with fissures, especially if looking for a stone that will give your house a more rustic look.

Origin

Where is the stone mined from? You need to consider this when making the purchase. The best stones are those from Italy, so do your due diligence and make sure the stone you are buying is from Statuario or Carrara. Avoid buying those from china as they aren’t as beautiful and don’t last long.

Parting shot

Above are some of the reasons marble is so popular, and if you love it, you should go ahead and install it in your home. For best results, make sure professional granite countertop installers Rockville or other professionals install it. After installing the stone, finish the look with a penetrating sealer to give the stone a long life.

16

Sep

Will Granite Countertops Increase Home Value?

You have been doing your research and found that granite is one of the best materials you can go with. It’s tough and will instantly transform your kitchen and bathroom countertops. If you are thinking about selling your house, later on, you must be wondering, will granite countertops increase home value?

The answer to this question is yes. Properly installed granite surfaces will increase your home value. Here are some of the reasons the countertops may add value to your property:

They have a timeless appeal.

Granite has been around for centuries, and over the years, it has retained its natural strength, beauty, and durability. Since the countertop is natural, it has unique veining, marbling, and colors. This means if you are looking to add value to your home and make it more appealing to potential home buyers, what better way than installing unique granite slabs?

They are low maintenance.

There is not a single homeowner that wants to spend hours maintaining their countertops. They want pieces they can easily clean with a damp rug then go on with their daily activities. This is granite. To keep granite in top condition, you only need to clean, seal, and polish it.

This is attractive to most homebuyers, as most are looking for beautiful surfaces that don’t require complicated care.

They are strong and durable.

There is no homebuyer looking to buy a material that they will have to replace after a few weeks or months—they want countertop pieces that will last for years if not their entire lifetime. Compared to laminate, solid surface, and butcher block countertops, natural stone countertops last a lifetime with minimal maintenance.

Granite surfaces are environmentally friendly.

Unlike many countertop materials on the market that require harmful manufacturing, granite is a natural product quarried from the earth without harmful chemicals. You can polish or hone granite before installing it, but you don’t need to take it through any other manufacturing process to get it ready.

When properly maintained, granite can last for as long as your home stands, which reduces waste in the landfills.

How can you maximize granite countertop ROI?

For you to increase the value of your home for as much as possible, you need to choose the right countertop slab. Some of the tips to put into place include:

Go for natural colors and patterns that complement your cabinetry.

A neutral color palette will appeal to more buyers, which increases your potential ROI when you sell your house. If you have lighter wood or white cabinets, go with black or dark gray countertops as they add eye-catching modern contrast to your home. On the other hand, if you have dark wood cabinets, choose beige, gray, or light cream countertops.

Avoid stains

Like other natural stone countertops, granite develops stains from contact with heat and moisture. If you love cooking and your kitchen has a lot of activity, choose countertops with a simple pattern as they will show less staining over time.

To reduce the stains from developing on the surfaces, seal the surfaces with a high-quality sealer. Granite experts recommend you seal the surfaces once a year but if the kitchen experiences large spills or strong chemicals, seal your surfaces more frequently.

Choose a polished surface.

A polished surface comes with plenty of benefits. For one thing, it makes the slab pop, so it’s more appealing when you install it in your home. A shiny, reflective surface also makes your kitchen look cleaner, newer and bigger.

The polished finish is also the least porous finish you don’t need to apply a lot of sealant. The surface is also easy to clean and maintain.

Buy slabs that are at least 3-cm thick

Stone slabs come in different thicknesses. Usually, 2 cm, 3 cm and 5 cm. Two centimeter slabs are the thinnest and they are best used in small surface areas and bathrooms. If looking for good quality pieces for your kitchen countertops, granite installers Rockville recommend you go for 3 cm slabs.

The slabs don’t require extra support, give your kitchen aesthetic appeal that your buyers are looking for, and won’t run you as much as the thicker ones.

08

Sep

What Happens If You Don’t Seal Granite Countertops?

If you have been around natural stone countertops, you know you need to seal them to keep them looking their best, but have you ever asked yourself what happens if you don’t seal granite countertops? Here are some of the things that can happen:

Stains from food and grease

When you don’t seal your countertops, they tend to quickly absorb food and liquids, leading to deep stains. Since the countertops are bare, the stains develop within a matter of minutes, even if you are quick to wipe the spill.

The countertops not only absorb liquids, but grease and pigments as well. For example, if you leave a carton of strawberries on your countertops, it’s only a matter of a few minutes, and you find a large stain on your countertops that is hard to remove.

Stains from water

Properly sealed granite will repel liquids and prevent them from permeating into the stone. As mentioned above, an unsealed stone absorbs liquids fast, including water. You might have the impression that something as natural as water can’t harm your countertops, but this isn’t the case.

In an unsealed countertop, water will penetrate, leaving behind watermarks which give your stone an ugly, dirty appearance.

Damage from cleaning products

Vinegar and other harsh cleaning products will damage even the sealed surfaces, but unsealed countertops are more susceptible to damage. Since you haven’t sealed the surfaces, the products that aren’t supposed to harm the surfaces end up hurting them.

For example, products containing citrus quickly eat away at the countertop, seep into the stone and damage the finish, causing discoloration. When you seal the surfaces, you plug the cracks and tiny fissures in the stone, keeping the products from going deep into the stone. As a result you can clean the countertops without worrying about damaging them.

Sealing is straightforward

To keep your countertops in top shape, you should seal them at the time of installation then once a year thereafter. While countertop sealing is such an important task, it’s not complex.

Begin with finding a good quality countertop sealer designed to resist water and oil-based stains. Before you apply the sealer, clean the surfaces, and ensure there are no stains on them.

For best results, work in small areas, giving the sealer time to absorb into the slab before applying the second layer. After covering the entire surface, give the countertops a few hours to dry before using them.

Other ways to maintain granite

Other than sealing it, there are plenty of other things you need to do to ensure your countertop lasts for a long time. These things include:

Don’t step on the countertops

Granite is tough, but it can’t withstand a lot of pressure, especially along the edges. When you are looking to reach onto the top shelf, it’s tempting to step onto the countertops. After all, they are made from stone, right? At no time should you step on granite.

If you have to reach on to something on the top shelf, use a ladder or stool.

Don’t place hot items directly on the countertops.

Granite can withstand heat, but when you repeatedly place hot pans on it, you are bound to discolor it or even cause extensive damage. To ensure your countertops last for a long time, avoid placing hot pans, pots, and other items directly on the surfaces. Instead, use pads, trivets, and other protective materials.

Watch your cleaning products.

As mentioned above, even sealed countertops can get damaged by tough cleaning products, so stay away from them. As a rule of thumb, avoid products bearing acids as they will etch at the surfaces or even discolor your valuable surfaces.

Its recommend you use water and soap to clean the countertops. If the surfaces are too dirty and want to use other cleaning products, first enquire from the countertop company whether you can use it.

Don’t cut directly on the surfaces.

The same way certain homeowners have the impression the countertops are tough, so they can step on them, it’s the same way they think they can get away with cutting onions, meat, and other materials directly on them.

Granite companies Rockville strongly advise against this as it not only damages the countertops, but also your knife. When looking to cut anything on the surface, use a cutting board.