15

May

How Far Can Granite Countertops Span Without Support?

When you are installing granite countertops, it’s common to wonder, how far can granite span without support? This depends on the thickness of the granite slab that you have. If your slab is 10” thick, you can get away with an overhang that is 1-1/4”.

The thicker the slab, the longer the overhang you can have without worrying about the countertop being unbalanced.

In addition to adding the supports at the right places, there are plenty of other tips you need to consider:

Rod the countertops

Rodding aims at reinforcing the countertops to prevent cracking and breaking of the countertops in areas where the stone could be more susceptible to pressure. One of the most effective ways of reinforcing the countertops is by using fiber rodding.

If you don’t know how to do it, there are plenty of guides online that you can follow. You can do the reinforcement by yourself or hire an expert to help you out.

Work at hiding the granite seams

When you bring two slabs together, you are bound to have seams. The big issue is, how can you make the seams less noticeable? Luckily, there are plenty of tricks you can use:

One of the ways is ensuring that the edges of the stone are clean. When they are clean, you are more than likely to have a cleaner seam. As you are bonding two slabs, pull the stones together. This way, you narrow the gap between the stone edges, making the seams less noticeable.

Another highly effective technique is dressing the edges, so they are as straight as possible. When choosing the adhesive color, go for one that closely matches that of the stone.

One of the highly effective ways of hiding the seam is putting it on a 45° edge. When you combine the edge lamination with clean edges, color-matched adhesive, and tight seams, you are bound to have excellent results.

Invest in high-quality slabs

Granite is a natural stone that varies greatly in color, veining, and patterns. It also comes in a variety of grades that include: commercial, builder, standard, and premium. For you to get the most from the stone you are installing, you should invest in a high-quality stone.

When you are shopping, be on the lookout for a stone selling at meager prices as it’s most likely of cheap quality. For you to buy a high-quality stone, only shop at reputable stores with a proven record.

Work with a reputable granite company.

Unless you are an expert, you should refrain from installing the countertops by yourself. Instead, hire an expert countertop company to help you out. One of the prime mistakes homeowners make is being in a hurry when hiring the contractors. Don’t do this.

Take your time to visit as many contractors as possible. As you are interviewing them, ask them for their past work. You also should visit review sites and see what other customers have to say about their experience with the countertop installation company.

For excellent results, ensure that the company is using the latest and properly maintained equipment. This ensures that the cuts are clean and accurate. This way, you are sure that the contractor will get the work done fast and accurately.

Consider granite remnants

If you are looking to install the countertops on a small countertop and you don’t have a large budget, you shouldn’t stress yourself over it. Instead, get granite remnants from friends and family. You also can ask a granite company whether it has any granite leftovers that you can use.

Most of the companies will sell you the remnants at meager prices. If you have a good relationship, the company can even give them to you.

Take good care of the countertops.

Installing the countertops isn’t enough—you have to take good care of them. In addition to protecting the countertops from the heat by placing pans and trivets when cooking, granite installers Rockville recommends that you also regularly seal the countertops so that spills don’t stain the countertops.

Also, regularly clean the countertops. When doing it, take care not to use abrasive materials that can etch the surfaces.

09

May

Can You Put Hot Pans On Granite Countertops?

If you know the history of granite countertops, you know that they are made from igneous rock through a process involving high temperatures and pressure. Due to this, you must be asking, can you put hot pans on granite?

Since it’s made from igneous rock, granite can withstand the heat, so a brief encounter with a hot pot won’t hurt them. While this is the case, regular exposure of the countertops to the heat will weaken the sealant putting the countertops at the risk of getting damaged.

To answer your question, yes, you can put hot pans on granite, but you shouldn’t do it too often as you will end up causing damage.

Protecting the countertops from damage

As we have seen, the countertops will get damaged if you place hot pans on them. So to protect them from damage, avoid placing the hot pots and pans directly on the surfaces. Instead, have a trivet or countertop cover in place.

If you have to place the pots and pans on the countertops, let them first cool down. Letting them cool for a few minutes is enough. Before placing them on the surfaces, wipe the underside to remove any black or burn marks that might be present.

Even if you are using an electric stove, wipe the surfaces to remove any materials that might have spilled or boiled over.

Restoring damaged countertops

In the event you destroy the countertops, you shouldn’t worry much as you can restore the damaged pieces. You do this using pastes and liquids. Buy the products from a local store and apply them by yourself—you don’t need to hire a professional to help you out.

If there are burn marks from the hot pans, you can easily rub them away with cleaning creams and solutions. You should note that while the products will remove the top marks, they aren’t effective at removing deeper marks.

In such a case, you don’t have a way out other than to consult a granite contractor. The contractor will advise you whether to apply a sealer or simply replace the countertops.

Other ways of keeping your countertops in top shape

Other than using trivets and pads when placing hot items on the countertops, there are plenty of other things you can do to keep the countertops in top shape. Some of these things include:

Don’t cut meat directly on the countertops.

The meat won’t destroy granite, but what is left behind is what is harmful. The meat might be containing salmonella and other bacteria that might find its way into the microscopic crevices of the countertops.

Also, when many homeowners handle meat, they have the urge to cleanse the countertop surfaces. Sometimes they use harsh chemicals that end up damaging the surfaces.

Get rid of the spills as soon as they happen.

When you are preparing food, it’s common for accidents to happen. Oils and acids can splatter all over the countertops, putting them at the risk of staining. To avoid this, you should clean the spills as soon as they happen.

When you notice spillage, use a mild cleanser or hot, soapy water and get rid of it as soon as possible. You should never let the spill sit on the countertops for long as it can etch the seal and stain the countertop.

Don’t sit or stand on the countertops.

Since the countertops are known to be tough, some homeowners have the impression that they can stand or sit on the countertops without any repercussions. Unfortunately, this isn’t the case.

Granite has plenty of fissures and striations that are vulnerable to cracking when you apply a lot of force on them. To keep your countertops free of damage, don’t climb or stand on them when reaching out to things, changing bulbs, painting, or engaging in any other activity.

Instead, use a sturdy stool or ladder to get the work done.

Conclusion

To reiterate, you can place hot pans on granite, but don’t make it a habit as you will damage the seal or even the countertops themselves. Granite installers Rockville recommend you always use trivets, hot pads, potholders, and other protective materials to keep the countertops in top shape.

28

Apr

Tips On How To Shine Quartz Countertops

Quartz countertops are an excellent addition to any home. Compared to both natural and artificial countertop materials, they are harder, more durable, and require less maintenance.

For you to keep your home looking spectacular, you have to maintain the countertops shining all the time. Would you love to know how to do it? Here are tips on how to go about it:

Clean the countertops daily

There is no way you can expect to have shining countertops if you don’t clean them. At least once a day, fill a spray bottle with plain water then squirt a couple of drops of mild soap such as dish detergent on the countertops.

Spritz water on the countertop to dilute the soap then use a soft cloth to wipe the counter.  When cleaning, start from one end and move to the other spraying and wiping a few feet at a time.

You shouldn’t worry about scratching the surfaces as quartz is tough. However, avoid using abrasive pads as they can leave streaking in the polish. They also sometimes leave a residue behind.

If you have gone for a long time without cleaning the countertops, it’s common to come across stubborn areas. To clean these areas, apply a small amount of vinegar to the problematic area and leave a wet rag sitting on top for a few minutes to loosen the gunk.

When it comes to soap, don’t use oil-based soaps as they can dull the shine. The best soap to use is standard dish soap.

Apply some polish

What better way to make your countertops shine than to use some polish? The cool thing is that you don’t have to buy the polish—you can make one in your home. To do it, add 25% vinegar to 75% water and mix it in a spray bottle. You can also purchase a vinegar-based spray cleaner.

Spray and polish as you work your way across the counter to keep the surfaces looking excellent. For extra dazzle, give the countertops the final polish using some spray and microfiber cloth.

Refinish the countertops

Do your countertops have a brushed and textured finish that wasn’t meant to be shiny? The solution for this is refinishing the countertops. You should note that different finishes have different results, so before you apply the finish to the entire surface, first apply it on a small area to see how it looks.

Get rid of food residues by thoroughly rinsing the countertops.

Sometimes keeping the countertops shining is as simple as rinsing them. Using a spray bottle, get the countertops as wet as possible. Since quartz is non-porous, nothing gets absorbed into the countertops, and this can leave a film on the surfaces that you won’t see in other materials.

To clean quartz surfaces, you only need to use a sponge to scrub the quartz and wipe the water off with a clean, dry cloth. Once the countertops are thoroughly dry, there shouldn’t be any streaks.

Disinfect the surfaces

It’s also important to disinfect the surfaces after they have come into contact with raw meat, fish, poultry, and seafood. To disinfect the surfaces, use paper towels to remove any residual moisture and other debris.

Then using a clean paper towel, spray the counter with a multi-surface antibacterial spray cleaner and allow it to stand for a few seconds. Work across the countertop while spraying and wiping from one end to the other until you are done.

If you don’t have a paper towel or don’t like using them, use bleach-free disinfecting wipes.

Tips to consider when shining the countertops

One of the main reasons the countertops aren’t shining is they have plenty of stains on them. Instead of going through the trouble of cleaning the stains, prevent them from happening in the first place. You can do this by:

  • Keeping the countertops clean all the time
  • Wiping away spills as quickly as possible
  • Regularly inspecting the countertops and getting rid of any stains or flaws you might come across.

When cleaning the surfaces, quartz countertop contractors Potomac advise against using substances with a high pH. This calls for you to avoid products such as oven cleaners, de-greasers, and ammonia. You also should avoid bleach and acetone.

24

Apr

Countertop Replacement Services: Understanding Faux Stone Countertops

Also known as faux stone, manufactured stone veneer is a manmade material designed to replicate the look of natural stone.

It comes in a wide variety of colors, shapes, and sizes and you can use it in different areas, including: stone backsplash, interior walls, fireplaces, and even in your countertop replacement project, especially if you are strained of money.

Would you like to know more about the stone veneer? Here are a few things you should know about it as given by the countertop replacement services provider:

How is stone veneer made?

The stone is composed of lightweight natural aggregates, Portland cement, and iron oxide that adds the color. The materials are put in a mold then pressed in high pressure resulting in highly dense, realistic-looking finished stone.

The first stone veneer was made in the 19th century and interesting enough, it was made from natural stone.

The manufacturers sliced natural stone into thick slabs then sold them. Although cement is a significant component of the veneer, it wasn’t part of it until the 1950s. Currently, most of the modern veneer stones are made from molds taken from carefully selected natural stone.

Some of the manufacturers go to the extent of replicating the rough and unique textures of natural stone, making it almost impossible to differentiate the two.

Is the stone veneer right for your home?

This is a subjective question. If you don’t like the natural look of stone veneer, you won’t like the surfaces in your home regardless of how good of an investment they are. On the other hand, if you like the natural look, then you will be proud of having the veneers in place.

How does veneer compare to natural stone?

In addition to being highly versatile, manufactured stone is cheaper, where it costs up to 1/3 the cost of natural stone. Since most of the manufacturers aim to produce veneer stones that closely resemble solid stone as much as possible, veneer stones tend to exhibit the same variations in size, shape, texture, and color to natural stone.

Just like natural stone countertops, stone veneer is maintenance-free. All you need to keep it looking spectacular is washing it to remove dirt and dust.

Since the material is cheap, you can save on your project without sacrificing on custom details.

Can you install the veneers by yourself?

Yes, you can install the material by yourself if you have the skills, but for ideal results, you should handle the project by yourself. If you have never done it before, let an expert veneer contractor help you out.

If you are confident in your skills, you should go ahead and try to install the veneers by yourself. Before you begin the project, check with the building inspector about the local building code requirements. You don’t want to be on the wrong side of the law, do you?

You should then choose veneer from different boxes that vary in shapes and color. When it comes to the installation, begin working from the corners, then work your way down from the top. This prevents mortar from staining the stones below.

If you discover the mortar dripping on one of the stones, wait for a day or two for it to dry before brushing it off with a whisk broom. If possible, hide the edges that you trimmed by pointing them up or down, above or below your eye level.

Once you are done, you can paint your new countertops to your preferred colors or let them retain their original color.

Conclusion

There is no denying that manufactured stone veneer comes with plenty of benefits. It’s cheaper, lightweight, comes in a wide range of colors, and ideal for both domestic and commercial applications.

If you feel it’s right for your home, work with reputable granite installers Rockville or any other professionals that will not only help you find the ideal material for your home, but also help you with the installation.

You can find contractors from friends or relatives. If none of them have hired a contractor in the recent past, try a Google search. When doing your research, pay attention to the reviews as they will guide you on the reputation of the contractor.

10

Apr

Tricks On How To Save Money When Buying Granite Countertops

This is what homeowners do when they are looking to buy granite countertops and other countertop materials: they find a local stone yard, pick a slab they like, get the price, and buy.

While this might seem like a highly convenient way of buying the countertops, it’s wrong, and you end up spending a lot of money than you should. Are you looking to save money when having a kitchen remodel project? Here are some of the tips to consider when buying the countertops:

Shop around

You will find kitchen countertops in big box stores, countertop fabricators, kitchen and bathroom design studios, and in other companies specializing in countertop materials.

For you to get the best price, don’t buy from the first company you come across. Take time to visit different companies and see what they have to offer. If you have friends and family that recently installed countertops, ask them where they got them from.

Visit different stores until you find a store selling high-quality countertops at the least price.

Buy the countertops in wholesale

As you are doing your research, keep a close eye on the companies that allow you to buy the countertops in wholesale. Just like any other item, when you buy in wholesale, you end up saving a lot of money.

For you to get a wholesale offer, you have to buy the countertops in bulk, so this option will work in your favor if you have a large kitchen.

Don’t waste the countertop material

To maintain a uniform countertop, countertop experts recommend you buy the entire slab in one piece. When you do this, it’s not uncommon to be left with more material than you need. The cool thing is that you don’t have to throw away the remaining material.

You can use the leftover stone in many ways, such as using it to cover a backsplash, use it as a durable finish for the sides of an island, or as a flooring transition between the kitchen and dining room.

Scour the boneyard

If you have a small kitchen and color consistency isn’t an essential factor for you, you don’t have to buy premium countertop materials from a countertop store. You can visit the local boneyard and get the countertops at a fraction of the cost.

Boneyards are areas in stone yards where homeowners return the stone slab leftovers once they can’t use them anymore.

Buy a more common color

Granite countertops and other stone countertop materials have tremendously lowered their costs, mainly due to improvement in manufacturing technology. While this is the case, you should note that countertops of a rare color are still expensive.

Luckily, the countertops come in many more affordable colors. To save money, avoid the rare colors. You might argue that the unique color will add more value to your overall house, but this isn’t the case.

Unless you have extra money and you want the look, there is no point in spending a lot of money on a rare color.

Go for a prefabricated material

A prefabricated stone is one that is already cut and polished. This stone is perfect for simple counters requiring few cuts. Highly consider going for prefabricated materials if your countertop cabinets are standard.

The materials come with three finished edges and a polished surface. While they are as good as the new ones, they cost half as much, which saves you a lot of money.

Buy from a local supplier

When you buy from a distant supplier, you have to handle the shipping costs, which can be high, especially if you are getting them from a different state. To save money, buy the countertops from a local supplier.

This way, you won’t pay much for shipping. When you place a large order, the supplier delivers the countertops at no cost.

DIY wherever possible

If you are a handy person, there are plenty of ways you can save money on your kitchen remodeling project. If you have the skills, instead of hiring granite countertop installers Rockville, do the work yourself.

Countertop installation isn’t an easy feat, so if it’s beyond your skill level, do the easy tasks such as sealing the countertops after the installer has installed them.

31

Mar

Expert Tips On How To Make Granite Countertops Shine

When you install granite countertops for the first time, they look elegant, and you are proud of them. With time, they wear out and get dull or even get scratched, which is depressing and discouraging. Luckily, you can revitalize the countertops by polishing them.

Why granite shines at initial installation

After it’s initially polished at the fabrication facility, granite has a beautiful natural shine. This shine is often due to the high quartz content present in the stone. The amount of shine on the stone is largely dependent on the finish of the stone. If you have a polished finish, your countertops will have an incredible shine.

Can you retain the shine?

Yes, it’s possible to retain the shine. The best way of doing it is by cleaning the countertop. Regular wiping of the surfaces with mild dish soap, warm water, and paper towel is highly effective, but for excellent results, use granite cleaner.

You shouldn’t use the common cleaning products such as Clorox, Windex, bleach, or vinegar as they will damage the stone and cause it to get dull.

How to make the countertops shine

If you have noticed your countertops beginning to dull, you should move with haste to rectify it. To do it effectively, you need to follow a series of steps that include:

Clean the countertops

Begin with removing everything from the countertops. Remove all keepsakes, appliances, and crockery and place them on the kitchen table or stovetop. After removing the large items, use a dry sponge to brush away any debris that might be present.

Scrub the surfaces

Scrubbing the surfaces is meant to remove any tough dirt that might have been left after the initial cleaning. When scrubbing the surfaces, remember that the countertops have a sealant that keeps them shiny and stain-resistant.

To protect the sealant, avoid using products that are either too acidic or basic. A little soap and water are enough to clean the granite surfaces. Add dish soap and warm water to a sponge, get a good lather then begin cleaning.

You should scrub the countertops from the back to the front in an “s” pattern. If you have stubborn or sticky spills, you may have to scrub harder.

Use a blade

If you have had the countertops for a long time and you don’t regularly clean them, it’s common to have gunk and other materials build up on the countertops. Since it’s hard to remove these with water, consider using a razor blade.

When using the blade, take care that you don’t scratch the surfaces. You do this by ensuring that the entire edge of the blade rests on the countertops. After removing all the gunk, rinse the sponge, ring it out, and wipe the remaining suds. Ensure that the countertops don’t have any large puddles or leftover suds.

Disinfect the surfaces

The purpose of doing this is to kill any germs that might be present. You don’t have to buy the disinfectant from the local store. Create your own 50/50 mixture of isopropyl alcohol and water. You should then spray the entire counter then wait for at least five minutes.

Buy granite polish

You will find granite polish in most home improvement and kitchen stores. When making the purchase, take the time to read the label to ensure that the polish is suitable for your countertops. As a rule of thumb, avoid general polishing products as they are known to damage the countertops.

Apply the polish

Spray the polish lightly over the countertops and let it sit there for 2-3 minutes. You should then buff the countertops with the polish using small, circular motions. Using a clean, soft cloth, work the polish into the granite.

Start in one corner of the countertops and work your way evenly over the countertops. Rub the polish into the countertops in small circles while paying attention to the edges. You should use a soft cloth as an abrasive material will scratch the granite.

For a streak-free finish, wipe off the polish with a damp piece of cloth. Streaks can easily ruin the appearance of the newly polished countertops, so granite installers Potomac recommend you remove any remaining polish with a soft cloth.

If you notice any excess water on the countertops after wiping them down, use another cloth to dry it off.

16

Mar

Forget Granite Countertops For A Moment: 7 Features That Make Laminate Countertops The Best Countertops In The Market

When looking to install countertops in their homes, many homeowners only think about granite countertops. What they don’t realize is that there are plenty of other countertop materials in the market they can go for.

One of the best materials is laminate. Laminate countertops come with plenty of attractive features that make them one of the best materials in the market to go for. These features include:

They are easy to find

Regardless of the texture, color, or print you are looking for, you will find laminate countertops that match your desires in hardware supplies or kitchen supplies store in your local area.

You can also easily find the countertops in your walk-in and online stores. As long as you know the countertops you want, you will find them in a store near you.

Plenty of options to choose from

The countertops are not only easy to find, but they also come in plenty of choices to choose from. Some of the common options include:

  • High-pressure laminates
  • Color core or color through laminates
  • Post-formed or drop in laminates
  • Marbled, glossy, or matte textured laminates
  • Thickness based graded laminates

If this is the first time installing the countertops, you should discuss it with your contractor and agree on the right ones for your home. As a rule of thumb, avoid those that don’t give your home an elegant appeal.

They are affordable

When they ask for a countertop quotation, most homeowners are shocked by the amount of money they have to part with to install their preferred stone countertops. Laminate countertops are affordable, with most of the brands costing less than half the price of most natural stone countertops.

This makes them an ideal choice when you are operating on a tight budget.  The countertops are also cheap and easy to maintain.

They are easy to install

If you have installed quartz countertops or any natural stone countertops, you have to hire a countertop installation professional to help you with the installation, which is added to the cost.

This isn’t the case with laminate countertops

Due to their ease of installation, you can even install them by yourself, especially if you are a DIY enthusiast. During the installation, don’t shy from getting creative with the design and color combinations.

You also should create different edge options such as the bullnose, beveled, eased, and ogee. It’s all up to you to decide what looks good for your countertops and go with it.

They are easy to clean

Laminates have a highly moisture repellent surface. This comes in handy at preventing grime and dust from sticking to them. As a result, you have an easy time cleaning the countertops.

You can easily clean laminate countertops using basic cleaning supplies such as water, vinegar, and other household cleaning agents.

Avoid harsh cleaning chemicals that can damage the surfaces.

They are impact resistant

Even the mighty Quartz, Dekton’s, and granite countertops easily chip or crack when you drop heavy pots or ceramic bowls on them.

This isn’t the case with laminate. Laminate countertops can take a literal pounding. Even when you drop a cast iron skillet on them, they won’t even flinch. Also, when you accidentally drop your tools on the countertops, they won’t get damaged.

They have antibacterial properties

Most of the manufacturers produce countertops with antimicrobial protection backed into them. This means that the countertops kill pathogens, which comes in handy at reducing your chances of getting sick. This also eliminates the chances of mold and fungi growing on the countertops.

They allow you to have an under-mount sink

Years ago, you could only have a drop-in sink when you installed laminate countertops. Courtesy of great innovation strides, it’s now possible to install an under-mount sink in your home. This gives your home an elegant, modern look.

Conclusion

If you are looking for affordable but elegant looking countertops, laminate countertops are your best bet. You can install them on any surfaces but not in the wet areas of the house, such as in the bathroom. For you to get the most from the countertops, ensure the pieces are installed by expert granite installers Rockville or any other professionals.

09

Mar

FAQs About Granite Countertops

Granite countertops are one of the most popular countertop types in the market. While they have been around for a long time, few people know much about them. Here are some of the frequently asked questions about the countertops:

Should you use the countertops in the kitchen?

Granite is perfect for use in the kitchen. Since the material is tough, it doesn’t etch, scratch, or warp; therefore, you don’t need to do much to keep it in top condition. The only thing you should do is to seal it during the installation and at least once a year thereafter.

Can granite get damaged?

One of the prime reasons people go for the countertops is because they are tough. While this is the case, it doesn’t mean they can’t get damaged. If you don’t take good care of them, they are bound to get damaged. For example, if you hit the countertops with a hard object, the countertops will develop a crack.

The countertops will also get damaged if you place hot objects on the surfaces.

Does granite stain?

When you seal the countertops properly, they don’t stain; however, if you poorly stain them or leave them unstained, they are bound to get stained. So, to prevent stains from developing, you should ensure that the surfaces are sealed by a professional.

You should note that even if your surfaces are properly sealed, they will develop stains if you leave liquids on them for a long time. To avoid this, make it a habit of wiping off the liquids as soon as they happen.

Are the countertops expensive?

Just like any other good quality product, the countertops don’t come cheap. While this is the case, there are several things you can do to reduce the cost. When you decide to install the countertops, don’t rush to buying them. Take time to visit different stores and see what they have to offer.

Compare the prices and the quality and buy from the store selling the highest quality products at the least cost. You should note that if you come across a company selling the products at a cost that is below the standard market prices, you will most likely be getting scammed.

To avoid this, only buy from a reputable company. Luckily, you can tell how reliable the company is by reading their online reviews.

Does granite harbor bacteria?

In addition to being used in residential properties, it’s also heavily used in the food and medical industry due to its sanitary qualities. As long as you regularly clean and care for the granite, there are zero chances that it will harbor bacteria and cause illness.

Is it wise to cut on granite?

Due to its tough nature, you might have the impression that you can go ahead and cut on the countertops, but this would be wrong. While it’s tough, the knives, especially the hot ones, can get into the countertops causing minor scratches. If you repeatedly cut on the countertops, you leave too many marks that give the countertops a cheap look.

To preserve the look of the countertops, always use a cutting board anytime you are looking to cut anything. You also should avoid placing hot pots and pans on the countertops.

Do the countertops need to be cleaned?

You should clean the countertops just like you clean marble countertops and any other countertop pieces you might be having in your home. For ideal results, use dish soap, powdered soap, and all-purpose cleaners. Never use abrasive products as they will damage the surfaces.

When should you replace the countertops?

Granite is designed to last for years, but you can opt to replace it due to many reasons. One of the reasons is if you are no longer excited by the current look of the countertops. You also should consider replacing the countertops if you are looking to improve the design and look of your house.

It’s also wise to replace the countertops if they are too old. Regardless of the reason, you are looking to undertake countertop replacement, ensure that an expert granite contractor Potomac does the work. Just like with the countertops store, ensure that the contractor is reputable and has been providing the service for a long time.

27

Feb

How To Polish Granite Countertops

Granite is one of the toughest materials in the market. Unfortunately, with time, it succumbs to scratches and etching. Dull spots also start showing giving the countertops an ugly appeal.

When this happens, you don’t have to replace the granite countertops. Work with granite experts and polish the countertops and restore the factory shine.

For you to do it effectively you should religiously follow a set of steps that include:

Clean the countertops

You can’t polish the countertops while they are still dirty, so you should start with cleaning them. Mix warm water and mild soap and use it to get rid of any spills and stains. Take caution not to use harsh chemicals on the countertops. Avoid products containing ammonia, bleach, lime, vinegar, lemon, and glass cleaners.

Get the granite polish

You can get the polish in two ways: you can make your own or buy already made polish from your local home improvement and kitchen stores. When purchasing the polish, avoid general-purpose polishing products as they have been proven to damage the countertops.

When it comes to making your polish, there are plenty of recipes you can follow. Regardless of the one you follow, ensure that the polish you make isn’t too acidic.

To make your granite polish, begin with three cups of warm water then add ¼ cup of baking soda.

Apply the solution

If your countertops are dull due to superficial scratches and light etching, you can restore the original countertop shine using granite polishing powder.

Make a paste by mixing the polishing powder with water then apply the polishing solution using a soft cloth. If using retail granite polish, spray it lightly on the countertops and let it sit for 2-3 minutes.

You should then buff the countertops with the polish using small, circular motions. Use a very soft cloth to do it as a more abrasive material will scratch the granite.

Once you are done, wipe off the polish with a damp cloth to get a streak-free finish. It’s normal to have excess water on the countertops after wiping the countertops down. If this happens, use another cloth to dry it off.

In most cases, your granite will polish nicely even when you do it by yourself, but if the countertop is profoundly scratched or damaged, the home remedies might not work. In such a case, contact a home restoration professional to professionally polish the countertops so that they look as good as new.

Professionals use wet or dry polishing techniques together with specialty tools. These tools cause irreversible damage, so you should only ensure professionals use them.

Tips on how to preserve your granite countertops

To reduce the frequency you polish the countertops, you should observe a set of tips that include:

  • Clean the spills immediately to prevent marks and stains from coming about. If you leave liquids on the surface for a long time, they cause dark, shadowy marks that give the countertops a cheap, ugly look.
  • Buff the countertops with cooking oil. This will make the countertops shiny and stain-resistant. Apply some cooking oil to the cloth and wipe it across the granite countertop surfaces. When doing it, apply gentle pressure. This will give the granite a nice shine, which also reduces the chances of stains coming about.
  • Although it’s tough and durable, granite is easily damaged when you cut directly on it. To protect it, always use a cutting board. You also shouldn’t leave any sharp objects lying around.
  • Place hot pans, pots, hair straighteners, and curling irons on an insulated mat. This is to protect the surfaces from getting burnt. It also prevents micro-scratches from coming about. According to granite installers Rockville, using an insulated mat also prevents the sealant from eroding quickly.
  • To prevent chemical damage, avoid keeping any cosmetics on the countertops. This is because most of the cosmetic products contain chemicals that can tarnish the countertops and break the sealer. Just like with hot products, place the cosmetics on a mat or tray. You can also lock them in a cabinet.
  • Keep the countertops sealed to protect the stone from everyday use. For peace of mind, do a bead test once in a while to confirm that the sealer is working optimally. Pour a few water drops on the countertops. If beads form, it shows that the seal is working properly. On the other hand, if the water drops get absorbed by the countertops, you should re-seal the countertops.
14

Feb

Quartz Countertops Installation Problems And How To Counter Them

Adding quartz countertops to your kitchen is an excellent way of brightening up your surfaces. The countertops are also tough, so when you install them, you are confident you have a surface that can withstand heavy use.

Are you looking to install the countertops in your home? You should know that plenty of problems can come about during installation. The most common ones being:

Visible seams

Imagine this. You get into a house after the countertop installer has given the green light. The countertop color is perfect as it complements the floor and cabinets, but on a closer look, you notice a long and obvious seam where the counter pieces join together.

Your heart sinks as this isn’t what you wanted. When you began the project, you wanted your new countertops to be visually unmarred, but this isn’t the case. There are large unsightly seams. Your project isn’t a success.

Your countertops will have an unsightly seam when they are poorly installed. Discuss with your installer and agree on how you are going to go about it. They might have to remove the countertops then install them anew, or they can seal the seams, so they are invisible.

Countertop cracks

In most cases, the countertops will crack when there are problems with the cabinets, such as the cabinets not being of the same height.

If this happens during installation, the installation professional should fix it as part of their job, but if the cracks come about after installation, you should get in touch with your contractor and ask them to diagnose the problem and fix it.

Scratches, dents, and other problems due to poor workmanship

When you decide to update your kitchen, you want the project to be perfect, but it’s not always the case. Scratches and dents are a common sign of poor workmanship, and they happen when you hire a cheap, inexperienced contractor.

Accidents are common during installation, but you shouldn’t accept shoddy workmanship.  If the dent or scratch is due to installer’s fault, ask them to fix it immediately.

How can you prevent the problems from coming about?

Luckily, there are several things you can do to prevent the above issues from coming about and leading to loss of money. Some of the things you can do include:

Hire an expert

Many homeowners try to cut costs by hiring the cheapest contractor they find. Quality and low prices don’t go together, so you can’t expect exceptional workmanship from a cheap contractor.

To reduce the chances of countertop problems coming about, hire an experienced professional. While they will come at a premium price, they are worth it as they will expertly install the countertops.

When choosing a contractor, keep your eyes out for scammers that might try to rip you off. If the contractor charges you a price that is way off the standard rates, they are most likely ripping you off, and you should stay away from them.

Protect your cabinets

Contractors join countertops with cabinets using adhesives. Sometimes the adhesive can get on the face of the cabinets giving them an ugly look. To avoid this, protect the cabinets before you start the installation.

Protect the cabinets by applying a strip of painter’s tape to the face of cabinets. This ensures that no dripping adhesive makes contact with the cabinets.

Use supports where necessary

Quartz counters are heavy; thus, not all cabinets can hold them. The surfaces might also have unsupported areas such as desks and overhangs that might require additional support.

If your cabinets aren’t strong enough, place backer boards or plywood under them. If there are unsupported areas greater than 12-inches, use a steel plate, corbels, or any other material to provide support and prevent sagging or even cracking of the surfaces.

Have everything else ready

Before you ask the quartz countertop installer Rockville to begin the installation, ensure everything else is in place. The electrical and plumbing should be roughed, the walls should already be painted and dry, the cabinets should be installed, the flooring should be finished, and the appliances should at least be at hand if not already in place.

This significantly reduces the chances of problems coming about as no other contractor will touch the countertops after installing them.