31

Mar

Expert Tips On How To Make Granite Countertops Shine

When you install granite countertops for the first time, they look elegant, and you are proud of them. With time, they wear out and get dull or even get scratched, which is depressing and discouraging. Luckily, you can revitalize the countertops by polishing them.

Why granite shines at initial installation

After it’s initially polished at the fabrication facility, granite has a beautiful natural shine. This shine is often due to the high quartz content present in the stone. The amount of shine on the stone is largely dependent on the finish of the stone. If you have a polished finish, your countertops will have an incredible shine.

Can you retain the shine?

Yes, it’s possible to retain the shine. The best way of doing it is by cleaning the countertop. Regular wiping of the surfaces with mild dish soap, warm water, and paper towel is highly effective, but for excellent results, use granite cleaner.

You shouldn’t use the common cleaning products such as Clorox, Windex, bleach, or vinegar as they will damage the stone and cause it to get dull.

How to make the countertops shine

If you have noticed your countertops beginning to dull, you should move with haste to rectify it. To do it effectively, you need to follow a series of steps that include:

Clean the countertops

Begin with removing everything from the countertops. Remove all keepsakes, appliances, and crockery and place them on the kitchen table or stovetop. After removing the large items, use a dry sponge to brush away any debris that might be present.

Scrub the surfaces

Scrubbing the surfaces is meant to remove any tough dirt that might have been left after the initial cleaning. When scrubbing the surfaces, remember that the countertops have a sealant that keeps them shiny and stain-resistant.

To protect the sealant, avoid using products that are either too acidic or basic. A little soap and water are enough to clean the granite surfaces. Add dish soap and warm water to a sponge, get a good lather then begin cleaning.

You should scrub the countertops from the back to the front in an “s” pattern. If you have stubborn or sticky spills, you may have to scrub harder.

Use a blade

If you have had the countertops for a long time and you don’t regularly clean them, it’s common to have gunk and other materials build up on the countertops. Since it’s hard to remove these with water, consider using a razor blade.

When using the blade, take care that you don’t scratch the surfaces. You do this by ensuring that the entire edge of the blade rests on the countertops. After removing all the gunk, rinse the sponge, ring it out, and wipe the remaining suds. Ensure that the countertops don’t have any large puddles or leftover suds.

Disinfect the surfaces

The purpose of doing this is to kill any germs that might be present. You don’t have to buy the disinfectant from the local store. Create your own 50/50 mixture of isopropyl alcohol and water. You should then spray the entire counter then wait for at least five minutes.

Buy granite polish

You will find granite polish in most home improvement and kitchen stores. When making the purchase, take the time to read the label to ensure that the polish is suitable for your countertops. As a rule of thumb, avoid general polishing products as they are known to damage the countertops.

Apply the polish

Spray the polish lightly over the countertops and let it sit there for 2-3 minutes. You should then buff the countertops with the polish using small, circular motions. Using a clean, soft cloth, work the polish into the granite.

Start in one corner of the countertops and work your way evenly over the countertops. Rub the polish into the countertops in small circles while paying attention to the edges. You should use a soft cloth as an abrasive material will scratch the granite.

For a streak-free finish, wipe off the polish with a damp piece of cloth. Streaks can easily ruin the appearance of the newly polished countertops, so granite installers Potomac recommend you remove any remaining polish with a soft cloth.

If you notice any excess water on the countertops after wiping them down, use another cloth to dry it off.

14

Feb

Quartz Countertops Installation Problems And How To Counter Them

Adding quartz countertops to your kitchen is an excellent way of brightening up your surfaces. The countertops are also tough, so when you install them, you are confident you have a surface that can withstand heavy use.

Are you looking to install the countertops in your home? You should know that plenty of problems can come about during installation. The most common ones being:

Visible seams

Imagine this. You get into a house after the countertop installer has given the green light. The countertop color is perfect as it complements the floor and cabinets, but on a closer look, you notice a long and obvious seam where the counter pieces join together.

Your heart sinks as this isn’t what you wanted. When you began the project, you wanted your new countertops to be visually unmarred, but this isn’t the case. There are large unsightly seams. Your project isn’t a success.

Your countertops will have an unsightly seam when they are poorly installed. Discuss with your installer and agree on how you are going to go about it. They might have to remove the countertops then install them anew, or they can seal the seams, so they are invisible.

Countertop cracks

In most cases, the countertops will crack when there are problems with the cabinets, such as the cabinets not being of the same height.

If this happens during installation, the installation professional should fix it as part of their job, but if the cracks come about after installation, you should get in touch with your contractor and ask them to diagnose the problem and fix it.

Scratches, dents, and other problems due to poor workmanship

When you decide to update your kitchen, you want the project to be perfect, but it’s not always the case. Scratches and dents are a common sign of poor workmanship, and they happen when you hire a cheap, inexperienced contractor.

Accidents are common during installation, but you shouldn’t accept shoddy workmanship.  If the dent or scratch is due to installer’s fault, ask them to fix it immediately.

How can you prevent the problems from coming about?

Luckily, there are several things you can do to prevent the above issues from coming about and leading to loss of money. Some of the things you can do include:

Hire an expert

Many homeowners try to cut costs by hiring the cheapest contractor they find. Quality and low prices don’t go together, so you can’t expect exceptional workmanship from a cheap contractor.

To reduce the chances of countertop problems coming about, hire an experienced professional. While they will come at a premium price, they are worth it as they will expertly install the countertops.

When choosing a contractor, keep your eyes out for scammers that might try to rip you off. If the contractor charges you a price that is way off the standard rates, they are most likely ripping you off, and you should stay away from them.

Protect your cabinets

Contractors join countertops with cabinets using adhesives. Sometimes the adhesive can get on the face of the cabinets giving them an ugly look. To avoid this, protect the cabinets before you start the installation.

Protect the cabinets by applying a strip of painter’s tape to the face of cabinets. This ensures that no dripping adhesive makes contact with the cabinets.

Use supports where necessary

Quartz counters are heavy; thus, not all cabinets can hold them. The surfaces might also have unsupported areas such as desks and overhangs that might require additional support.

If your cabinets aren’t strong enough, place backer boards or plywood under them. If there are unsupported areas greater than 12-inches, use a steel plate, corbels, or any other material to provide support and prevent sagging or even cracking of the surfaces.

Have everything else ready

Before you ask the quartz countertop installer Rockville to begin the installation, ensure everything else is in place. The electrical and plumbing should be roughed, the walls should already be painted and dry, the cabinets should be installed, the flooring should be finished, and the appliances should at least be at hand if not already in place.

This significantly reduces the chances of problems coming about as no other contractor will touch the countertops after installing them.

30

Jan

How Can You Get The Most From Granite Countertops?

In addition to being beautiful, granite countertops offer an excellent return on investment. When you install the right countertops, you significantly improve the look of the entire room and keep it looking fabulous for years, if not decades. It’s no doubt granite is a significant investment and one you will be proud of for years.

The only catch is that you have to buy the right countertops and install them professionally. Luckily, you can do it using these tips:

Always view the entire granite slabs

When you visit the granite stores, the countertop company will show you countertop pieces. If you aren’t experienced, you will be satisfied with the pieces, which ends up being problematic.

Since granite is a natural stone, it varies widely in color, veining, and patterns. These variations don’t appear accurately on countertop pieces, so you might be mistaken about how the countertops will look upon installation.

To avoid surprises, ask the countertop company to show you the entire slab so you can be aware of the color variations and veins. Keenly inspect the slab keeping your eyes out for areas that show significant variations and where the contractors will place a seam between two slabs.

To reduce the number of seams that will be on your countertops, select the largest granite slab. Granite slabs are often available in sizes of up to 10 feet in length. You should note that while they significantly reduce the number of seams, they are often brittle and heavy to handle and transport. So you should be ready to make the sacrifice.

Strive to keep the countertop prices down

Due to the popularity of the countertops, some sellers tend to markup their prices to take advantage of unsuspecting homeowners. For you to avoid buying the countertops at extremely high prices, take time to do your research.

Visit different companies and see what they have in store. Expect the prices to vary depending on the location of the company and the quality of the stone.

Of course, avoid companies located in high-end areas as they will be more expensive due to the high rent. You also should avoid the big chain stores. In addition to selling countertop stones at high prices, they also don’t have variety, so you are stuck with only a few options.

While you should strive to keep the prices as low as possible, be cautious of a company selling the countertops at meager prices. The chances are that the slabs aren’t genuine and will come apart after a few months.

Take time and hire the right installation company

If you are like other homeowners, when you are looking for an installation company, you go online and key in your search term. You then proceed to contact the first company that shows up first in the search results. Don’t do this.

You are better off working with a contractor with a proven record. So the first thing you should do is to ask your friends and relatives that recently installed countertops about the contractor they used.

You also should visit the review sites and see some of the top-rated contractors in your area. Select a few and schedule an interview.

During the interview, ask them how they are going to install the countertops, how they are going to address the issues in your kitchen, and any other questions that will help you gauge their expertise.

Once you have found an ideal contractor, have a written quote. This will protect you from future attempts by the contractor to increase the price.

Go for a simple design

Although every homeowner wants a new look for their home, you shouldn’t go for an intricate countertop design that is not only expensive, but also hard to execute.

You should note that the countertop installation professional charges depending on several factors such as the size of the work surface, presence of matching backsplash, presence of cutouts for fixtures and plumbing, and other details.

A design doesn’t have to be complex to be elegant. Work with experienced granite countertop installers Rockville and install a simple design that will cost you less to install and last for a long time.

Parting shot

For you to install countertops, you will be proud of for years, buy a high-quality slab, and ensure an experienced contractor installs it.

06

Jan

7 Things To Consider When Buying Granite Countertops

Granite countertops are elegant to look at and extremely easy to maintain. Unfortunately, you can’t buy any slab you come across. You need to take your time and find the right one. What should you consider when buying the countertops?

Your taste

Everything begins here. You want a slab that you will be proud of when you get in the house. The slab you go for depends on what you like and how you live. Before you buy the granite, ask yourself these questions:

  • Do you want straight lines or right angles?
  • Are you looking to install a top-mount, under-mount, or drop-in sink?
  • Do you prefer countertops with details on them?
  • Are you into light or dark colors?
  • Do you want the countertop to be stable or moving?
  • What type of vein style do you like?

Your preferences and the look you want to create will come in handy at helping you choose the right material from the thousands that will be thrown at you by the fabricator.

Size of your kitchen

Do you have a large or small kitchen? The size of the kitchen will help you determine the right granite slab and its pattern. If you have a small kitchen, go for light-colored granite such as Giallo ornamental. The countertop will make the kitchen look larger and more appealing.

If you like dark colors, go with dark granites with light veins. They will also give your kitchen a large look.

Do you have a large kitchen? Experiment with dark colors. You also should try out different patterns depending on the size of the kitchen.

Three of the best patterns are: marbled, solid, and speckled.

Amount of lighting

The lighting in the house will also greatly determine the type of countertops that you will install in your home. If your kitchen doesn’t have any natural light, go with gold or white countertops.

Does your kitchen have substantial light? Darker colors such as black, mahogany, and deep blue will give the kitchen the look you want.

You should note that you can add more light to the kitchen by installing more lights. So, before you head to the stores to make a purchase, consider the chances of adding more lights to the kitchen to improve its look.

Color

You can’t buy a countertop of any color—it has to match the cabinets, floor, and other parts of the kitchen. You can carry a sample to your home or bring the cabinet door with you into the showroom so that you can see how it will look with your cabinets in place.

The color of the cabinets depends on the look you want and the lighting in your home.

Countertop edges

In addition to the look they give to your kitchen, the countertop edges also affect how people interact with surfaces. If you have small children, you want round corners other than sharp edges that will hurt the little ones.

Type of sink

The sink you install in your kitchen or bathroom needs to be stylish and functional. The type of countertops you are looking to install depends on the type of sink you are interested in.

For you to buy the right design, size, and color of granite, work with your contractor, who will guide you.

Finish

How would you like the countertops to look like once you have installed them? Are you looking for a honed, polish, or leather look?

The honed finish is also known as matte finish, and when appropriately done, it leaves the surfaces smooth and feeling like satin. You need to reseal the countertops regularly. This finish is ideal when installing the countertops in a casual, low traffic area.

The polish finish is meant to hide smudges and fingerprints. When done right, the polish reveals the true character and color of the countertops.

Finally, there is a leather finish. It’s much more effective at hiding smudges and imperfections than any other material. The finish looks much better in dark granite. For you to maintain a great look, countertop contractors Potomac recommend you clean the surfaces daily with a microfiber cloth and cleaner.

01

Nov

6 Granite Countertops Problems And How To Fix Them

Many homeowners install granite countertops as they are durable. Unfortunately, the countertops aren’t impervious to damage. Here are six common problems with granite kitchen countertops and how to fix or prevent them:

Ruptured countertop surfaces

A ruptured countertop gives the kitchen a cheap and unmaintained look. Many homeowners are scared of the rupture as they think they have to replace the entire countertop surfaces. This isn’t the case. If the damage is isolated, you can fix the damaged slab without touching the other areas.

Countertops rupture due to many reasons:

  • Poorly crafted joints
  • Countertops installed over uneven surfaces
  • Failure to give glue enough time to dry during the installation
  • Placing a lot of weight in one area

How you fix the damaged area depends on the extent of the damage. For small cracks, use an adhesive. For deeper cracks or damage brought about by excessive weight, remove the damaged slab using a drill then apply special filler.

To maintain a uniform look, choose a filer that blends seamlessly with the countertops.

Separating seam joints

If you notice the countertops moving and the joints separating after applying pressure on them, the adhesive might have weakened. Hire a professional stone technician to make the right adjustments to the countertops. The expert should remove the existing adhesive and replace it with a better, more durable option.

Avoid doing the replacement by yourself as you risk causing more damage than was originally there.

Dull surfaces

If your countertops are slowly losing their shine, it’s because you are exposing them to harsh cleaning products. Don’t rush to replace the countertops as there are plenty of solutions you can use without having to replace the surfaces.

Hire a professional from your local store to fix the dull granite countertops. He/she can do this by buffing and re-polishing the countertops. Don’t try fixing this problem on your own as you risk making it worse.

To prevent the problem from coming about in the future, watch the type and quality of cleaners you are using. Most cleaners are too harsh for the surfaces; therefore, stay away from them.

For everyday cleaning, go with soap and warm water. Avoid products with chemicals. When in the store, read the ingredients and ensure none can damage the surfaces.

For peace of mind, choose products designed specifically for granite countertops.

Countertop stains

Properly sealed countertops are highly resistant to stains, but when you allow even water to soak in, the countertops easily stain.

Oils, wine, and even fruit juice can penetrate the surfaces leaving stains. Don’t remove the countertops when stains happen. Remove oil stains with a homemade paste made from acetone and baking soda.

When it comes to organic stains, remove them by soaking a paper towel in bleach, then placing it on the affected area.

To prevent the stains from coming about, seal the granite regularly with a high-quality granite sealer. You also should make a habit of wiping the spills as soon as they happen.

Heat damage

Just as granite is resistant to water damage, it’s also resistant to heat damage. Unfortunately, it can be damaged by hot pots and pans. This is because the sealant and finish aren’t as heat resistant as the rest of the stone.

When you repeatedly place hot dishes on the countertops, you leave black marks on the surfaces bringing about thermal shock and even cracks. Extreme heat can also damage the sealer making granite susceptible to stains and acid damage.

For you to prevent the damage, avoid placing hot pots and pans directly on the countertops. Always use hot pads, pot holders, trivets, and other barriers.

If the damage has already happened, how you repair it depends on the extent of the damage. If minor, remove the stain using toothpaste. You can also re-polish the surface. Only consider replacing the countertops if the damage is extensive.

Scratches

Only materials harder than granite can cause scratches. Scratches aren’t a major problem with the countertops, but to avoid them, granite installers Rockville recommend you avoid sliding rings with precious stones across the surfaces.

If they have already happened, applying a thin layer of polish on the surfaces will get rid of most of them. If you have the skills, you can apply the layer, but if you have never done it before, let an expert handle it.