15

Nov

6 Steps On How To Polish Granite Countertops

Polished granite gives your kitchen a sleek, subtle look. Unfortunately, polished countertops are expensive hence not many homeowners can afford them. Luckily, you can install rough countertops then polish them later on. Interested in learning how to polish granite countertops? Here are the steps to follow:

Step 1: Clean the countertops

Everything begins here as you can’t polish dirty countertops. Thankfully, cleaning the countertops is easy. You need warm water and a mild detergent. Mix the two, then apply them on the surfaces using a soft cloth.

Once you are done with cleaning, dry the surfaces with a microfiber cloth. You should never leave the surfaces wet or damp as you put the surfaces at the risk of staining.

Step 2: Make or buy the polish.

You can get the polish in two ways: you can make it or buy it. To make the polish, get a small bowl, baking soda, warm water, and fork. Mix 3 parts baking soda and 1 part water until you get a smooth thick paste. Ensure the paste is smooth before using it.

If you aren’t a dab hand at DIY projects or you don’t want to go through the trouble of making your own polish, buy the polish from your local retail store. When making the purchase, ensure the polish is suitable for granite. As a rule of thumb, avoid general-purpose polishing products as they have been shown to damage granite.

Step 3: Apply polish.

Once you have your polish, your next step should be to apply the polish on your countertops. Place a thin, even coating of the paste on the surfaces. If using baking soda paste, place small dollops of it across the countertops using a spoon.

If using retail granite polish, spray it lightly over your countertops and let it sit there for at least 2 minutes.

Step 4: Buff the countertops

After applying the polish, use a clean, soft cloth and work the polish into the granite. Start from one corner and work your way evenly over the countertop. Rub the polish into the countertops in small circles, making sure you buff the edges as well.

You should note that you should always use a soft cloth for buffing as using a more abrasive cloth will scratch the granite and damage it.

Step 6: Wipe off excess polish

It’s normal to have an excess polish, and the excess streaks can easily ruin the polished surface’s appearance. To remove the excess polish, use a soft cloth and dampen it lightly with warm water.

Use the cloth to wipe down your countertop and eliminate any remaining baking soda paste or retail granite polish.

If you find excess water on the countertops after wiping it down, dry it off using another cloth.

In most cases, your countertops will polish up nicely, but if your countertops have deep scratches, the above remedies won’t get the work done. In such a case, you have no way out other than to hire a professional to polish the surfaces for you.

The professionals use specialized tools, and they can either wet or dry polish the countertops.

Tips on retaining the shine

Polishing the countertops isn’t enough—you need to take care of them to retain the shine. How do you do this? Here are tips for doing it:

Clean spills as soon as they happen: Leaving liquids on the countertops for a long time causes the granite to develop dark, shadow-like marks that mess with the countertops’ look.

You should note that even bright-colored beverages can stain the countertops, so don’t take any risk. As soon as there are spills on the countertops, get rid of them. When wiping the spills, use a soft cloth as a rough one will damage them.

Buff the countertops: To create a nice shine and temporarily reduce the staining risk, buff the countertops with cooking oil. To do it, apply cooking oil to a clean cloth, then make circular motions across the surface. For best results, granite contractors Potomac recommend you do this periodically, such as daily or once a week.

It doesn’t matter the type of oil you use. You can use olive oil, vegetable oil, or even avocado oil. It’s all up to you.

07

Nov

6 Tips On How To Prepare Cabinets For Granite Countertops

So, you have settled on granite? Good choice. But before you place your newly selected countertops in their assigned area, you have to ensure the space is ready for the new guest. How do you do this? Here are tips on how to prepare cabinets for granite countertops:

Remove the old countertops.

If you are replacing the countertops, you must first remove the old countertops before installing new ones. Start with removing the seal anchoring the countertops to the wall using a knife or any other sharp object.

Depending on the countertops, you may be having screws anchoring the old counters to cabinets. The screws will most likely be underneath, so look them there and remove them if present.

Once the screws are off, it’s time to remove the old countertop.

If the house is new and you are installing the countertops for the first time, the only thing you need to do is to ensure the cabinets are in good condition and level. Place a flat slab on top of them, and it should contact the cabinets in all areas.

If the cabinets aren’t level, you have a reason to worry as installing granite countertops will create pressure points that increase the chances of the countertops breaking.

Level the surfaces

To ensure your countertops have a long life, work on leveling the surfaces. One of the things you can do is to place shims under the cabinets to level the tops. You can also place plywood over the cabinets and place shims underneath the plywood.

You should note that placing plywood over the countertops will add height to the cabinets. Before installing the countertops, ask yourself whether you are comfortable with the added height.

Have enough supports

Granite is heavy, so you shouldn’t have large portions of it hanging over thin air. In areas where the countertops don’t have cabinets to rest on, add supports. There are plenty of materials you can use for this. Consult your contractor.

Remove plumbing

If you already put the plumbing systems in place, you may have to remove them as they often get in the way during installation. Over the years, we have seen homeowners removing the faucets and other plumbing appliances without first turning off the water.

Don’t do this as it often creates a huge mess that takes a lot of time to clear. Sometimes the water causes serious cabinet damage that you have to hire a contractor to help you fix them.

To be safe, turn off the water before you remove any plumbing appliance.

If installing the countertops for the first time, you obviously don’t have sinks or faucets in place. So have them delivered and be ready for installation to make it easy for installers to make a template to the sink’s exact specifications, so you have a perfect installation.

The same thing goes for faucets. If the granite installers have to cut space for them, they need to be on the site at least a day before installation.

Remove the dishes from the cabinets.

If you are like other homeowners, you don’t want your dishes exposed to the chaos of countertop installation so remove them before the installation process begins. Of course, you should place them in a different room.

If you have many dishes and don’t want to go through the trouble of removing them, then returning them, cover the top drawers with a protective sheet to protect them from dust and other debris.

Be present on the day of installation.

Even if everything is in order, you may still have to make last-minute decisions. For example, if you don’t want a lot of sink to show, you have to ask the granite contractor Rockville to move the granite edge flush with the wall of your kitchen sink.

If you don’t mind the top flange of the sink showing, let the contractor know about this to make the necessary adjustments.

The other decision you need to make is the location of the seams. Even if you bought the largest granite slabs, you have to deal with seams as long as your kitchen is large. Discuss with the contractor about the location of the seams. For an even and beautiful look, aim to hide the seams as much as possible.

31

Oct

How To Shop For Granite Countertops

Granite always delivers: It brings exclusivity, adds a touch of elegance, and improves the value of your home. To get the most from it, you have to buy the right one. Not sure how to go about it? Here are tips on how to shop for granite countertops:

Know what you want

You can’t buy any slab you come across—you need to know what you want and what will look the best for your home. Remember, granite comes in a wide array of colors and patterns. It also comes in plenty of edges, with the most common edges being: square, rough, bullnose, and rounded.

You also need to know the size of the countertop you need. This will require you to take a tape measure and measure the number of square feet of surface area you need. As you take the measurements, remember to include edge allowances, overhangs, backsplashes, seam allowances, and other things.

If you aren’t sure about the right countertop that will look the best for your home, get a professional’s input. The technician will even help you choose the right shape of slab, the right size, the appropriate slab thickness, and many other things.

Once you know what you want, start visiting different countertop and home improvement stores asking for quotes. Most companies will give you a free quote, and all you need is to compare the quotes and settle on the most sensible.

While the cheapest quote might be attractive, be cautious about it as the contractors might be selling substandard products.

Simultaneously, avoid extremely priced countertops as the company might be trying to rip you off.

Don’t buy the slabs countertops.

While online shopping is convenient, you shouldn’t buy the countertop slabs online. This is because a slab might be looking good in the store photos, but have a completely different look in your kitchen or bathroom, often due to lighting.

When looking to buy granite, the best way to go about it is by visiting the local showroom and physically inspecting each granite slab. Even after inspecting the slab at the store, don’t make the final commitment to buy the slab.

Take a sample of the slab to your home and see how it looks on your surfaces. If you like the look, go ahead and make the purchase.

Pay attention to the seams.

Seams make it easy to join different countertop slabs, but they can also mess with the counters’ look. If you have to use more than one slab, you have to deal with seams. The seams’ quality will vary depending on the length and width of the cabinets, the actual physical size of the slab, and access to the property.

To ensure your property doesn’t have ugly seams, work with experienced contractors who will help you minimize the number of seams in your countertops. They do this by ensuring they work with whole slabs as much as possible.

Before installing the countertops, enquire from the contractors where the seams will be located and how visible they will.  This will ensure everyone is on the same page, and there are no surprises once you have installed the countertops.

Invest in a good thickness

Thin countertop slabs are not only cheap-looking, but they also don’t hold a lot of weight. When you are at the store, always go for a thick slab. Thankfully, you can tell how thick a slab is by looking at it.

Other than thickness, also touch the slab. If it feels weak or has an abnormal texture, stay away from it.

Work with a professional

Buying the right countertops is one thing and an entire ball game to properly install the countertops. Unless you are a dab hand at DIY projects, you should let granite installers Rockville handle the installation.

As you are hiring, ensure the contractor knows geometry. This knowledge will come in handy at ensuring you have as few seams as possible. To find such a professional, take your time and ask them as many questions as possible before hiring.

After installing the countertops, remember to take good care of them. As a rule of thumb, avoid placing hot items or weighty items directly on the surfaces. You also should avoid cleaning the surfaces with vinegar and other tough products that can etch the surfaces.

17

Oct

How Do I Calculate How Much Granite Countertops I Need?

How do I calculate how much granite I need? Is a common question you will hear from homeowners looking to install granite countertops for the first time.

Granite is sold in square footage so what you need to do to determine the amount of granite you need is to find out the overall square footage of your countertop area.

How do you do this? Here is a guide on how to go about it:

How to calculate the amount of granite you need

  1. Measure the length of your countertops along the wall, taking the measurements in inches. The measurements should include the one-inch overhang for any countertop edge that isn’t against the wall.

If the counter is broken up into sections due to the presence of an oven or sink, subtract the occupied space from the overall length.

Measure the width of the countertop beginning from the wall, extending outward to the front of the countertop.

Multiply the length of the countertop by the countertop width. The resulting number is the area of the countertop in square inches.

2. Measure the height of your backsplashes. The measurement should reach from the countertop surfaces to the top of the backsplash.

Multiply the length of the countertop to the height of the backsplash to get the area of your backsplash.

Add the area of the backsplash to the area of the countertop, and the resulting number is the total amount of granite you need expressed in square inches.

3. Finally, convert these results to square feet. To do this, divide the number of square inches by 144.

If this is your first time buying the countertops, you should know that granite comes in slabs, and chances are your measurements won’t exactly match the available sizes of your granite slab.

The good thing is most countertop sellers will only charge you for the section of the slab you use.

What should you look for when buying a granite slab?

Thickness

You want a thick countertop that won’t break when you install it. Avoid the popular ¾ inch countertops as they are fragile and often require laminate edges and supports. While they are affordable to install, they don’t last long enough, and you have to replace them more often.

For best results, buy 1-inch countertops. While they will be more expensive to buy, they will give you a long service making them affordable in the long run.

Cracks and natural pits

Most hairline cracks and pits are natural and add natural beauty to your countertops, and you have nothing to worry about when you see them. Unfortunately, sometimes the cracks are too deep, which compromises the integrity of the countertops, especially if your countertops are less than 1 inch thick.

At the time of purchase, carefully go through the countertops, and if you notice an imperfection, ask the stone seller or fabricator how it affects the stone and how it can cause harm.

Seams

If you have the money, opt for seamless granite slabs as they tend to look better. While the seamed countertops look good at the time of purchase, it’s not the case five or ten years down the line.

Edges

To have an easy time installing the countertops, get a custom-designed edge that will fit your cabinet detail. Most fabricators won’t customize the edges, so you need to visit different stores and ask them whether they are willing to customize them for you.

If, on the other hand, the standard edges are okay with you, go with bevel edges.

Installing the countertops

After buying the countertops, the next step should be to install them. If you have the skills, you can install the countertops by yourself, but for best results, let experienced, and certified granite installers Rockville handle it.

You should note you have to seal the countertops at the time of installation to prevent them from staining and getting damaged. For best results, use a high-quality sealer. Most manufacturers tend to seal their countertops, and you don’t want to waste money resealing them.

Before installing the countertops, first test whether they are properly sealed. You do this by pouring water on the slabs. If the area darkens, you need to seal the surfaces.

16

Sep

Will Granite Countertops Increase Home Value?

You have been doing your research and found that granite is one of the best materials you can go with. It’s tough and will instantly transform your kitchen and bathroom countertops. If you are thinking about selling your house, later on, you must be wondering, will granite countertops increase home value?

The answer to this question is yes. Properly installed granite surfaces will increase your home value. Here are some of the reasons the countertops may add value to your property:

They have a timeless appeal.

Granite has been around for centuries, and over the years, it has retained its natural strength, beauty, and durability. Since the countertop is natural, it has unique veining, marbling, and colors. This means if you are looking to add value to your home and make it more appealing to potential home buyers, what better way than installing unique granite slabs?

They are low maintenance.

There is not a single homeowner that wants to spend hours maintaining their countertops. They want pieces they can easily clean with a damp rug then go on with their daily activities. This is granite. To keep granite in top condition, you only need to clean, seal, and polish it.

This is attractive to most homebuyers, as most are looking for beautiful surfaces that don’t require complicated care.

They are strong and durable.

There is no homebuyer looking to buy a material that they will have to replace after a few weeks or months—they want countertop pieces that will last for years if not their entire lifetime. Compared to laminate, solid surface, and butcher block countertops, natural stone countertops last a lifetime with minimal maintenance.

Granite surfaces are environmentally friendly.

Unlike many countertop materials on the market that require harmful manufacturing, granite is a natural product quarried from the earth without harmful chemicals. You can polish or hone granite before installing it, but you don’t need to take it through any other manufacturing process to get it ready.

When properly maintained, granite can last for as long as your home stands, which reduces waste in the landfills.

How can you maximize granite countertop ROI?

For you to increase the value of your home for as much as possible, you need to choose the right countertop slab. Some of the tips to put into place include:

Go for natural colors and patterns that complement your cabinetry.

A neutral color palette will appeal to more buyers, which increases your potential ROI when you sell your house. If you have lighter wood or white cabinets, go with black or dark gray countertops as they add eye-catching modern contrast to your home. On the other hand, if you have dark wood cabinets, choose beige, gray, or light cream countertops.

Avoid stains

Like other natural stone countertops, granite develops stains from contact with heat and moisture. If you love cooking and your kitchen has a lot of activity, choose countertops with a simple pattern as they will show less staining over time.

To reduce the stains from developing on the surfaces, seal the surfaces with a high-quality sealer. Granite experts recommend you seal the surfaces once a year but if the kitchen experiences large spills or strong chemicals, seal your surfaces more frequently.

Choose a polished surface.

A polished surface comes with plenty of benefits. For one thing, it makes the slab pop, so it’s more appealing when you install it in your home. A shiny, reflective surface also makes your kitchen look cleaner, newer and bigger.

The polished finish is also the least porous finish you don’t need to apply a lot of sealant. The surface is also easy to clean and maintain.

Buy slabs that are at least 3-cm thick

Stone slabs come in different thicknesses. Usually, 2 cm, 3 cm and 5 cm. Two centimeter slabs are the thinnest and they are best used in small surface areas and bathrooms. If looking for good quality pieces for your kitchen countertops, granite installers Rockville recommend you go for 3 cm slabs.

The slabs don’t require extra support, give your kitchen aesthetic appeal that your buyers are looking for, and won’t run you as much as the thicker ones.

08

Sep

What Happens If You Don’t Seal Granite Countertops?

If you have been around natural stone countertops, you know you need to seal them to keep them looking their best, but have you ever asked yourself what happens if you don’t seal granite countertops? Here are some of the things that can happen:

Stains from food and grease

When you don’t seal your countertops, they tend to quickly absorb food and liquids, leading to deep stains. Since the countertops are bare, the stains develop within a matter of minutes, even if you are quick to wipe the spill.

The countertops not only absorb liquids, but grease and pigments as well. For example, if you leave a carton of strawberries on your countertops, it’s only a matter of a few minutes, and you find a large stain on your countertops that is hard to remove.

Stains from water

Properly sealed granite will repel liquids and prevent them from permeating into the stone. As mentioned above, an unsealed stone absorbs liquids fast, including water. You might have the impression that something as natural as water can’t harm your countertops, but this isn’t the case.

In an unsealed countertop, water will penetrate, leaving behind watermarks which give your stone an ugly, dirty appearance.

Damage from cleaning products

Vinegar and other harsh cleaning products will damage even the sealed surfaces, but unsealed countertops are more susceptible to damage. Since you haven’t sealed the surfaces, the products that aren’t supposed to harm the surfaces end up hurting them.

For example, products containing citrus quickly eat away at the countertop, seep into the stone and damage the finish, causing discoloration. When you seal the surfaces, you plug the cracks and tiny fissures in the stone, keeping the products from going deep into the stone. As a result you can clean the countertops without worrying about damaging them.

Sealing is straightforward

To keep your countertops in top shape, you should seal them at the time of installation then once a year thereafter. While countertop sealing is such an important task, it’s not complex.

Begin with finding a good quality countertop sealer designed to resist water and oil-based stains. Before you apply the sealer, clean the surfaces, and ensure there are no stains on them.

For best results, work in small areas, giving the sealer time to absorb into the slab before applying the second layer. After covering the entire surface, give the countertops a few hours to dry before using them.

Other ways to maintain granite

Other than sealing it, there are plenty of other things you need to do to ensure your countertop lasts for a long time. These things include:

Don’t step on the countertops

Granite is tough, but it can’t withstand a lot of pressure, especially along the edges. When you are looking to reach onto the top shelf, it’s tempting to step onto the countertops. After all, they are made from stone, right? At no time should you step on granite.

If you have to reach on to something on the top shelf, use a ladder or stool.

Don’t place hot items directly on the countertops.

Granite can withstand heat, but when you repeatedly place hot pans on it, you are bound to discolor it or even cause extensive damage. To ensure your countertops last for a long time, avoid placing hot pans, pots, and other items directly on the surfaces. Instead, use pads, trivets, and other protective materials.

Watch your cleaning products.

As mentioned above, even sealed countertops can get damaged by tough cleaning products, so stay away from them. As a rule of thumb, avoid products bearing acids as they will etch at the surfaces or even discolor your valuable surfaces.

Its recommend you use water and soap to clean the countertops. If the surfaces are too dirty and want to use other cleaning products, first enquire from the countertop company whether you can use it.

Don’t cut directly on the surfaces.

The same way certain homeowners have the impression the countertops are tough, so they can step on them, it’s the same way they think they can get away with cutting onions, meat, and other materials directly on them.

Granite companies Rockville strongly advise against this as it not only damages the countertops, but also your knife. When looking to cut anything on the surface, use a cutting board.

28

Aug

What Are The Different Grades Of Granite Countertops?

It’s a fact granite can transform any kitchen or bathroom surface, but before you rush to install granite countertops, you should know granite comes in different grades that include:

Level 1 granite

Often referred to as builder’s grade or commercial grade, level 1 granite is a lower quality granite, often imported from China and sold through big box stores, granite liquidators, or cut into tile.

This granite has a consistent pattern, but it comes in a variety of colors to choose from, including beige, green, brown, grey, and black.

One of the most popular colors is Santa Cecilia, a light beige stone with bursts of burgundy, gold, yellow, and black. There is also Ubatuba that features an elegant dark green background with speckles of brown, gold, and black.

You may also find White Fiorito attractive. It features black and brown speckling on a soft white slab base.

The material is usually pre-fabricated and used in apartments, furniture, and prefabricated models. This granite is usually of a thinner cut, usually 3/8 inch, and it requires you to install a plywood backing to provide it with more strength.

Although, the slab comes with an entry-level price, it’s durable and highly versatile. This makes it an ideal choice for indoor and outdoor projects both in commercial and residential applications.

Level 2: Mid-grade granite

From its name, this is a mid-grade granite with a thickness of ¾ inch. The material is usually imported from India or Brazil, and it’s characterized by unique colors, more uniform patterns, and a variety of markings.

Granite at this level is known as the silver, and as a homeowner, the best stone to buy is one between “single silver” and “double silver.” At this level, you can find most of the colors available in the market ranging from light to absolute black.

The silvers have speckles, veining patterns, or flecks. They might also be uniform with plenty of options to choose from.

Mid-range granite slabs are ideal for projects throughout the house from kitchen islands to vanity tops and Jacuzzis, to hearths and fireplace surrounds.

Since they are imported, the slabs vary between shipments, so you should avoid buying them online. The best way to go about it is to visit the stone yard and see the individual slab and determine whether its ideal for your application.

Level 3: High-grade granite

This is the finest quality of granite, and it’s often referred to as the gold.  Granite of this level often comes in rare colors, unique, striking patterns, or a combination of both.

The best place to use this granite is in the kitchen as a countertop or as a signature piece for islands. You can also use it on smaller vanities, around fireplaces, and tub surrounds.

Level 4 exotic granite

Exotic granite is naturally rare, with quarries producing limited quantities. This makes it the most expensive countertop material and often common with homeowners that want to make a bold statement in their house. Most homeowners install the countertop on fireplaces, coffee tables, and accent pieces.

Choosing a high-quality granite countertop

For the countertop to last for a long time, you should buy a high-quality one. When making the purchase, you should pay attention to several things that include:

Size: A good quality granite slab should be square, rectangle, or any of your desired shapes. The tolerance shouldn’t exceed 1 in length, and the breadth and thickness tolerance shouldn’t exceed 155 inches.

Color: A good quality granite slab should have a uniform color, uniform thickness, and homogenous crystalline texture.

Hardness: The slab should be hard, dense, and sound. You can check the hardness of the stone by pressing it with a hard object. If you press it and chips of the stone split, stay away from the slab.

Polishing: The stone should have one face properly polished and the edges straight and perfectly at a right angle, which can be achieved by machine or hand cutting. This not only gives the countertop an elegant appeal, but it also makes it easy for granite contractors Rockville to install it.

Talking of installation, ensure the stone is installed by experienced contractors. You don’t want technicians to destroy a stone you have spent a leg and arm on, do you? The contractors should also be insured. This way you are sure you will be compensated in the event of an accident.

31

Jul

How Long Do Granite Countertops Last? Find It Here

One of the reasons homeowners are attracted to granite is because it’s durable. Since it’s made from tough materials, it’s resistant to scratching and heat.

Homeowners know granite is durable, but how long do granite countertops last?  When properly maintained, granite can last for a long time. Experts say the countertops can last for more than 100 years.

Comparing granite to other countertop materials

So how does granite compare to the other countertop materials?

  • Natural stone and granite: 100+ years
  • Cultured marble: 20 years
  • Laminate: 20-30 years
  • Concrete countertops: 20 years
  • Tile: 100+ years

How can you ensure the countertops last for as long as possible?

As mentioned above, you need to do the right things for the countertops to last for a long time. Some of the things you should do include:

Choose the right color.

Did you know the color of the stone has a great impact on the durability of the countertops? When you choose the wrong color for your lifestyle, you will be bored with it fast, or it will get stained, forcing you to replace it. The most popular colors to choose from are:

Black: Black is sleek, elegant, and never gets out of style. Black can also give your kitchen the impression of space.

White: Looking to give your kitchen a modern and contemporary look? White is the way to go. For a great look that you will proud of for years, pair it with white appliances and sinks.

Red: It’s said to be the color of daring and energetic. Many homeowners shy away from it so that you won’t find it in many homes. It’s rare to come across pure red, but it’s easy to bump into red granite featuring white, blue, or light-colored highlights that you can use to make a powerful statement.

Green: For a traditional and earthy look, green is the right color to go with. You can also pair green with bursts of grey and brown to create an old-fashioned, comforting vibe that makes your kitchen one of the most relaxing places to be.

Seal the countertops

Another way to make your countertops last for a long time is to seal them. Granite is naturally porous, so air can pass through it. At the time of installation, you should seal the stone so no liquids can go through and cause stains.

To maintain the sealing properties, make it a habit to seal the counters at least once every one or two years.

You can do the sealing yourself or hire an expert to help you out. Regardless of who does the work, ensure you use a high-quality sealing product.

Clean the countertops regularly

Can you imagine a simple act as cleaning the countertops can give your surfaces a long life? Every day, clean granite with warm water and a soft rag. You also should consider investing in a disinfectant cleaner designed specifically for granite surfaces.

You should avoid regular cleaning products on granite as they tend to be too abrasive, and they can easily break down the sealants, exposing your countertops to stains and damage.

Protect the surfaces from damage

Even if the surfaces are tough, when you hit them with heavy material, they will crack, and you have to replace the entire slab. You don’t want this, do you? To protect the surfaces, don’t hit them with a heavy object.

When preparing your food, always use a cutting board.

Ensure the countertops are properly installed

Everything begins here. If your countertops aren’t properly installed, it’s a matter of time before they break. To prevent this, ensure you use extra beams and other support systems necessary to hold up granite.

This calls for you to hire experienced granite contractors Rockville. While they will be a little bit expensive, they will properly install the countertops, which will save you a lot of money in the long run.

Use the countertops properly.

You will have the most properly installed countertops, but they will crack or suffer from other forms of damage if you misuse them. To avoid damage, don’t stand, sit, or use the countertops for any other purpose other than what they are designed to do.

11

Jul

Do Granite Countertops Scratch?

Granite is one of the most popular countertop materials in the world. It’s referred to as the hardest, scratch-resistant materials you can invest in. While this is the case, you must have heard some of your friends or even family members saying that their countertops developed scratches.

Do granite countertops scratch? They do. The countertops can be scratched by other items that are equally hard or harder than granite itself. These include stones such as diamonds. So you should avoid pressing your diamond ring into granite or pulling it along the surface.

Quartz and other cutting devices designed to cut through granite will also scratch the countertop material. In most cases, contrary to popular belief, knives won’t scratch granite, but using them directly on the surface will dull them. So to preserve them, you should always have a cutting board in place.

Why do the countertops scratch?

While the countertops are tough and durable, they aren’t scratch proof. When you roughly use them, or an accident happens, the countertops can crack, chip, or even develop major scratches.

Some of the reasons the countertops can develop scratches and cracks include:

  • Falling of heavy objects on the countertops
  • Cutting vegetables with a sharp knife directly on the countertops
  • Using abrasive products on the countertops. This often happens when you are cleaning the surfaces.
  • Sliding heavy utensils or pottery with hard pointed parts on the countertops.

Even a minor scratch on the countertops will spoil the beauty of the countertops. The scratches also trap dust, creating a space for bacteria and other microorganisms to grow.

Due to this, you should move with haste and fix the scratches.

Ways to fix granite scratches

There are plenty of ways you can fix the scratches, and it varies depending on the depth and size of the scratch.  You can group scratches into three main categories:

  • Hair like scratches
  • Scratches deeper than 2mm
  • Scratches deeper than 3 mm

You can fix the minor scratches on your own, but for scratches deeper than 2mm, you should seek professional help.

Fixing hair-like scratches

Hair like scratches are easy to fix, and you can easily fix them on your own using one of the following methods:

Washing the scratches with water and dish wash: Here, you need to find a course rag and wash the scratched area with warm water and dish wash. You should saturate the granite surface with a dishrag soaked with hot soapy water and let it sit for some time.

With little pressure and cleaning, some of the scratches will fade and others disappear. If there are any deeper scratches, they will remain as they are.

Use penetrating sealers: You can apply a penetrating stone sealer at least once a year to add extra protection to your granite counters. All you need is to buy a brand that is recommended by the manufacturer and follow the application directions. After applying it, give it time to dry completely. The sealer soaks into the scratches and fills the scratches, making them invisible to the eye.

Other ways you can fix the hair-like scratches include: using resin scratch stick and ultra-fine steel wool.

Fixing scratches deeper than 3mm.

As mentioned above, you should refrain from attempting to fix scratches deeper than 2 mm. If you got larger scratches, you are better off hiring granite experts.

Most of the contractors will use a diamond polishing or sanding pad to repair small or medium scratches. Since diamond is harder than granite, it will remove the annoying scratches.

Preventing scratches from coming about

Prevention is always better than cure, so you should always strive to prevent the scratches from coming about instead of repairing them. According to granite installers Rockville, the best way to prevent scratches from coming about is to seal the counters regularly.

After sealing it at installation, you also should seal it once every year. By sealing the surfaces, you provide a protective coating that is hard to remove unless you dig too hard into it.

It’s also wise to keep damaging materials such as precious stones and other materials stronger than granite away from the counters.

30

Jun

Common Types Of Granite Countertops Damage

Like any other countertop material, granite countertops suffer different forms of damage. Some are simple, and you can easily fix them on your own while others are complex, and you have to ask a professional to take a look at them. In some cases the damage is so extensive you have to replace the entire countertop slab.

Some of the damage your countertops can have include:

Separating seam joints

This happens when the adhesive is falling apart. If the seams are coming apart several years after installation, it could be due to old age, but if you recently installed the countertops and they are coming apart, it might be due to improper installation.

Seams come apart if they are too large, the contractor used the wrong epoxy, or the contractor didn’t put enough work into them.

To fix the problem, you need to contact a reputable professional and ask them to inspect the countertops and find out what they can do to fix the problem.

Chips along the countertop edges

Countertops will develop chips along the edges, especially where most of the cooking happens. The chips come about due to constant contact of the cooking utensils with the countertops.

To fix this issue, ask a professional store technician to inspect the chipped surfaces carefully. The contractor should then prepare the area and apply a color matching epoxy material. An experienced professional won’t have a problem fixing the area and hiding the etched surfaces.

Dullness around the sink

It’s normal for countertops to dull around the sink area due to the activities that take place there. Since the surfaces are in constant contact with water and exposed to cutting activities, granite tends to dull and even wear and tear out fast.

Luckily, you can restore the dullness with a diamond refinishing system. Ask a professional technician to help you out, and you will restore your countertops to as good as new.

Cracks

Cracks completely spoil the aesthetic appeal of the house. Luckily, if the cracks are small, you can fix them, but if they are large, you have no way out other than to replace the entire countertop slab.

Cracks on the countertops come about due to plenty of reasons that include:

  • Poorly glued joints
  • Installation of the countertops on uneven surfaces
  • Failing to give glue enough time to settle
  • Putting a lot of weight at the center of the countertop

If the cracks are small, you can easily fix them with adhesives; however, if they are deeper, you may have to remove the damaged portion, then replace it with a better one. Countertop installers sometimes use special fillers when they feel the cracks aren’t too large to warrant replacement.

When choosing filler, choose one that sticks effectively to your countertops.

Staining

You will have your countertops staining around stoves and cooktops. If you haven’t sealed your counters, the surfaces will absorb oil-based stains and darken. To restore your countertops to their former glory, you need to use Poultice.

Apply the material on the stained area and cover it with a plastic seal. Over time, the solution will dry and turn to powder that will absorb the oil stain. If you find the stain isn’t going away, you can reapply Poultice as many times as you want until all the stains are gone.

Water damage

They say water is life, but did you know it can be deadly to your countertops? The effect is worse if you have a small kitchen. If you haven’t sealed your countertops, water will get to the inner layers and stain your surfaces

Luckily, in most cases, the stain goes away when water evaporates. If water was stained (such as in juice), you have to ask a professional technician to help you out.

High-temperature effect

Granite counters are known for their toughness and ability to withstand high temperatures; however, when you introduce extremely high temperatures at once, the counters are bound to get damaged.

For example, when you carelessly place a hot pan (straight from a flame), directly on the surfaces, you will damage the countertops. Granite companies Potomac recommend you try salvaging the ugly spots using toothpaste. If this doesn’t remove the spots, replace the countertops.