31

Mar

Water On Granite Countertops: Can You Leave Water On Granite Countertops?

If you are asking, can you leave water on granite countertops? Yes, you can, but it comes with repercussions.

If your countertops are properly sealed, you can get away with having water on the surfaces for some time, as the countertops won’t absorb water, but when you leave the water on the surfaces for a long time, there is the risk of it getting to the deeper layers of the countertops and staining them.

The situation is worse when you have hard water on your premises as the hard water leaves a white, filmy residue that is hard to remove.

What should you do about water stains?

To restore your countertops, you need to remove the water stains. How you go about it depends on the type of stains you have. To help you out, here are ways to remove these stains:

Removing light stains on a daily basis

You need to use a mild detergent and water on a sponge to remove these stains. If you have the budget, use a commercial cleaning product designed specially for granite cleaning.

When buying the commercial cleaner, ensure that it’s suitable for granite and it’s not acidic, as this can damage the sealant and stone.

Buying the best sealer is one thing and an entire animal using it. To be on the safe side and get perfect results, use the product as per the directions given by the manufacturer.

To have an easy time, clean the stains as soon as you notice them, which means less work on your part.

Light hard water stains

Have you noticed light spots around your sink or basin? These are light hard water stains, and you should move with haste and remove them. For the best outcome, remove them using a mild detergent and brush them with soft bristles. You can also use a toothbrush.

To lift the mineral deposits, put a cleanser on the stain, then gently scrub it with a brush. Once you are done, rinse it off with clean water and dry it with a towel.

You can also use a designated cleaning agent and let it sit on the stain for about 30 minutes to loosen the minerals. After this, scrub the surfaces gently with a soft brush and rinse it dry once the stain is gone.

Slightly stubborn hard water stains.

If the detergent and brush aren’t removing the water stains, use a home remedy such as baking soda. Start with creating a paste by mixing baking soda with a small amount of water until you form a paste. You should then apply the paste to the hard water stain then gently scrub it with a soft bristle brush, then once you are done, rinse the fresh water and dry with a towel.

Removing water rings around the base of your faucet

If you have got hard water running through your system, you will sometimes have water rings around the base. These rings are often hard to remove, so you need to use tough removal products, often plastic scraper or razor blade.

To remove the water ring using a plastic putty knife, ensure that the edge is flat against your granite surface. You should then remove the mineral deposits by pushing the blade against them by applying gentle pressure.

If doing it correctly, the buildup should start flaking off, and you should wipe it off with a sponge, rinse it with clean water, and dry it with a towel.

If you try using the putty knife, but it doesn’t remove the deposits, use a sharp, clean razor blade. Keep the razor blade level with the granite surface, then slowly and gently loosen the mineral deposits.

Of course, take care not to cut your fingers or the granite surface as you are doing the cleaning.

There you have it

You can leave water on your countertops, but it will come with repercussions. To prevent the stains from resulting, move with haste and remove the water as soon as you notice it.

To reduce the absorption rate of the countertops, work with your granite contractor Rockville and install a high-quality sealant on the surface of the stone.

17

Jan

Do You Need Trivets On Granite?

If you are asking, do you need trivets on granite, you must have installed granite countertops in your kitchen, and you are wondering whether you should protect them using a trivet, right?

You place trivets between the countertop and the hot pan to protect the surfaces from getting burned. And yes, you need trivets on granite.

The cool thing is that trivets do more than protect the counters from burn marks—they also protect you from having broken baking dishes or a cracked countertop due to thermal shock.

Overall, having a trivet in place reduces the chances of damaging your valuable items, so it’s wise always to have them in place.

But aren’t granite countertops heat resistant?

Yes, granite countertops are heat resistant, and this is one of the primary reasons they are heavily used in the kitchen, but they aren’t heatproof.

This means that while you might not experience any damage on the countertops when you place hot pans on them for the first few times, when you repeatedly do it, you risk causing permanent damage to the surfaces.

What are other granite best practices?

Besides having a trivet or hot pad on your countertops to protect them from damage, there are plenty of other best practices that ensure your countertops retain their good looks for a long time. Some of these best practices include:

Clean the countertops regularly

There is no way your countertops will look good if you don’t clean them regularly, is there? Make it a habit to clean your surfaces at least once every day.

The cool thing is that cleaning the countertops is easy as all you need is soap and water. Spray some soapy water on your countertops, then wipe it with a clean piece of cloth, and you are good to go.

Regardless of how dirty your countertops are, don’t clean them with ammonia, bleach, degreasers, glass cleaner, and other abrasive products as they reduce the effectiveness of the granite sealer, leaving your countertops vulnerable to stains. To avoid damage and keep your countertops looking good for a long time, stick to cleaning them with soap and water.

When choosing the soap type, avoid dish soap as its repeated use causes a soapy build-up that dulls the shine of your surfaces, leaving them ugly and uninviting. For the best outcome, use soap designed to clean granite surfaces.

Seal the countertops regularly

As much as they are tough, granite counters are porous. This means they have pores on them that increase their chances of staining should spills happen. You should seal the countertops with countertop sealing products to seal these pores.

There are plenty of products in the market, but not all are right for your countertops. Research and find one designed for your countertops.

You should do the sealing at the time of installation then once a year thereafter. You can do the sealing work yourself or hire a professional to help you out.

For the best outcome, it’s always wise to have a professional do it.

Clean spills as soon as they happen

As you are preparing the meals, accidents are bound to happen. For example, coffee, soda, citrus juice, tomato sauce, or even water will spill on your surfaces. Even if you have sealed the countertops, the liquids can find their way under your countertops and cause hard-to-remove stains, when you allow them to stand there for a long time.

To avoid this, make it a habit to clean spills from your countertops as soon as they happen.

Use cutting boards

When you are chopping meat, fruits, or vegetables, it’s tempting to want to chop directly on your countertops due to how tough they look, but don’t. This is because you will scratch the countertops, which gives the surfaces a cheap, dull look.

To keep your countertops scratch-free, always use a chopping/cutting board to protect both your countertops and knives.

Granite installers Rockville also recommend you keep off hard objects such as rings and bottles as they can scratch or even dent the countertops, and you don’t want this, do you?

 Yes, you need trivets on your countertops.

To keep your countertops in pristine shape, you need trivets. There are no right or wrong trivets. As long as the units provide you with the protection you need, you are good to go.

07

Jan

How Do You Make Granite Countertops Look Good?

Granite countertops look magnificent in any home, and this is one of the primary reasons many homeowners go for them. If you have had your countertops for a long time and they have started losing their original exquisite look, you must be wondering, how do you make granite countertops look good, right?

Well, there are plenty of ways you can do it. Some of these ways include:

Shine the countertops

When you installed the countertops for the first time, you must have noticed an inviting natural shine. The shine is largely due to the high quartz content in granite.

While the shine is inviting when new, over time, it fades off, giving your countertops an old, cheap look.

To make your countertops look good, you need to maintain this shine. Besides cleaning the countertops regularly, you also should regularly polish the surfaces.

Thankfully, there are plenty of polishing products in the market you can use. All you need to do is find those that match your countertops and give your surfaces a perfect look you are looking for.

When polishing the countertops, take care not to use rough cleaning tools that scratch the surface. As a rule of thumb, use a soft cloth, precisely a microfiber cloth, that won’t cause any harm to the surface.

Use the same soft cloth to buff the surfaces and buff in a circular motion to don’t cause any harm and reach the entire surface.

Other ways to keep your granite looking good

Besides polishing the countertops, there are many other ways to keep your granite looking good. Some of these other ways include:

Take good care of the countertops

Like your car, clothes, appliances, or any other thing, if you want your countertops to look good, you have to take good care of them.

The beauty is there are plenty of ways to take care of them. Some of these ways include:

Clean spills immediately: As soon as spills happen, you should clean them to avoid hard-to-remove stains from forming.

Use coasters: Coasters come in handy at preventing the hot pots placed on the countertops from coming into direct contact with the countertops. As a rule of thumb, use high-quality coasters that will provide the countertops with maximum protection and last for a long time.

Use cutting boards: The same way you should use coasters and hot pads is the same way you should use cutting boards when cutting meat, vegetables, and other food items. As a rule of thumb, never cut directly on granite surfaces.

Don’t sit on the countertops: It’s normal for most homeowners to sit on the countertops as they wait for food to cook. Others will come to the kitchen and sit there as they chat. This is wrong.

To avoid cracking your countertops, avoid sitting on them, especially on the edges. You also should avoid standing on them to reach the top shelves or replace a burnt bulb.

Clean the countertops regularly

As mentioned above, cleaning the countertops goes a long way towards keeping them looking good. When doing the cleaning, use the right cleaning products.

In most cases, water and soap are enough to keep the surfaces in top shape, but you can use commercial cleaning products when looking for that extra shine. When buying the cleaner, use one specifically designed for granite surfaces.

Never use ammonia, citrus, or vinegar to clean the surfaces as they are highly acidic cleaners, and using them will dull the surfaces.

The right way to clean the countertops is to spray or mist the cleaner across the entire surface, then let it sit for a minute, after which you wipe it with a soft microfiber cloth until it’s dry.

Seal the countertop

The final thing you should do is seal the countertops to lock out any materials that might try to find their way into the countertops. You can seal the countertops or hire granite countertop installers Rockville to help.

When sealing the surfaces, work in small sections to don’t spray the same area more than once. After applying the sealant, wipe the surfaces with a soft cotton cloth until completely dry.

20

Dec

Can You Paint Granite Countertops?

If your countertops are old or you don’t like their current look, instead of removing them, one of the ways to improve their look is to paint them. So to answer your question, can you paint granite countertops? Yes, you can do it.

To get the most from painting your countertops, you need to do several things that include:

Properly prepare the surface

There is no way the paint will properly adhere to the surface if you don’t properly prepare it. For the paint to adhere properly, you need to rough up the surface by sanding it. The surface also needs to be clean, so after sanding the area, you should clean it so no dust or dirt particles might make their way into the paint, primer, or sealer during the project.

Apply the right primer

For the paint to adhere well without chipping or rubbing off, you should apply the right primer. If this is the first time doing it, take your time to find the right primer for your surfaces. You can apply the primer by yourself, but let it be done by an experienced professional who knows what they are doing for the best outcome.

Choose the right color scheme and paint.

There is no way your countertops will look good if you choose the wrong color scheme or use the wrong paint, so you should be cautious when making your choice.

As a rule of thumb, choose a paint color that goes along with the rest of the house. For example, if you are going for the marble look or any other color palette, choose multiple colors to complete the design.

If you have a small room, go for lighter colors to give the impression of space. And if you are one of the lucky people and have a large room, there is no harm in going for darker colors that will absorb light and make the room look and feel smaller and cozy.

If you aren’t sure about the right color or color combinations to go with, get the input of a professional.

When it comes to the type of paint, you should go for epoxy, latex, or acrylic that is known to be durable.

The best paint type to choose is acrylic latex paint that holds up well against heat and water, so you are sure that it will last for a long time when you apply it.

Don’t rush

When many homeowners decide to paint their countertops, they rush to find granite colors, and paints. While this is good as it gets you into doing rather than pondering, it often results in more mistakes.

To avoid mistakes, take your time and fully understand what you need before beginning your project. It’s always wise to consult a professional so that you understand your project better and find out whether you can handle it by yourself or you have to hire an expert.

For the best outcome, be patient throughout the countertop painting process. Carefully sand the surfaces, patiently prime them, paint them with precision, and you will have the surfaces of your dreams.

Seal the surfaces

After painting the surfaces and giving them enough time to dry, the next thing you should do is seal them. The purpose of sealing the countertops is to lock in the paint and protect the beautiful work underneath.

Like the paint and other materials, you used before, ensure that you use a high-quality primer that will last for a long time and give your surfaces the top-notch protection they deserve.

While there are many sealers you can apply, the best to go for is the masonry sealer that works the best on granite and other natural stones.

You can apply the sealer yourself or ask a granite contractor Rockville to help out. When making the application, you can use a roller or paintbrush.

Once you are done with sealing, give the countertops at least 24 hours to completely dry before placing items on them.

29

Oct

What Is The Cheapest Color Of Granite?

If you have been shopping for granite countertops, you must have noticed that the color of the countertop has a significant impact on the price, where the uniform, rare colors tend to go at a higher price.

If you are operating on a budget, you must be wondering, what is the cheapest color of granite, right? The cheapest countertops are those with speckled and busy designs. The most common ones being:

Azul Platino

Azul Platino is quarried near Vigo, Spain, and it has been around for hundreds of years. This granite features an off-white background with small bluish-gray specks, and in some cases, it will have black spots scattered throughout the slab.

It’s also common to have the countertops with white or black veining. On closer examination, the countertops will have green, brown, or even pink flecks. The countertops will also have amethyst quartz crystals that provide brilliant violet flecks throughout the slab.

Azul Platino slab is usually large, making it an excellent choice for kitchen islands and other large-sized countertop needs.

New Caledonia

New Caledonia is quarried in Espirito Santo, Brazil, and the granite features a uniform appearance meaning that it’s common to find two almost identical slabs, which is not common with most other natural granite slabs.

The granite slab features a white background with gray and brown speckles that run uniformly throughout the slab.

When you look at the slab from a distance, it appears to be comprised of shades of gray ranging from light gray to deep charcoal with black and white patches throughout the slab, but on closer examination, you will notice hues of brown and sparkling crystals running throughout.

The beauty with New Caledonia is that it’s highly versatile and looks great in both contemporary and traditional kitchens and bathrooms.

You can pair it with dark wood-stained cabinetry or with light cabinetry for the charcoal flecking to stand out.

Dallas white

Dallas white granite is quarried in Aguia Branca, Brazil, and the granite has low water absorption and low porosity, making it an excellent choice for kitchens and bathrooms.

The slab has a white background with dark crystals scattered throughout, and in some cases, it might have slight veining.

The countertop’s uniform flecking works perfectly in traditional kitchens where the granite’s brown, golden cream veins and lavender flecks blend perfectly, giving your kitchen a beautiful look.

For the perfect look, pair the countertops with white or dark wood cabinetry such as walnut.

The unique thing about Dallas White granite is that, unlike other granites in the market, it doesn’t need face resin due to the tight grain structure found in the stone.

The lack of resin means that you can place hot pots on the countertops without worrying about damaging the granite surface.

Uba tuba granite

Also known as Ubatuba, Uba tuba is mined near Ubatuba, Sao Paolo, Brazil. The granite features a dark green background with consistent green, gold, and brown flecks scattered across the slab.

It also has a tight granite pattern with a few veins running throughout the stone. The veins present are usually small and gold, white, or turquoise.

The minerals in the granite vary in size from as little as an apple seed to as large as half a dollar, which significantly adds visual interest to the stone.

If you have a traditional kitchen, pair Ubatuba with dark cabinetry but if looking to create a contemporary space, pair the countertops with white cabinetry.

If you aren’t sure about the look you want to create, you don’t have to worry, as the various colors found in the Uba Tuba slab create a sophisticated yet simple look that works for every home.

Don’t buy poor-quality granite.

While you are looking for the cheapest color, you shouldn’t buy the cheapest quality countertop as it’s a matter of time before the countertop starts breaking apart and they end up being too expensive in the long run. Instead of cutting the cost on the quality of the slab, stay away from fancy edges, and instead, opt for a standard sink and choose granite remnants for the small areas instead of buying an entire slab.

To avoid getting ripped off, walk with experienced granite countertop installers Rockville to these stores.

30

Sep

Do Granite Countertops Chip Easily?

If you are wondering, do granite countertops chip easily? No, they don’t. Granite is one of the toughest countertop materials in the market, and as long as you install counters that are thick enough and you take good care of them, you don’t have to worry about them chipping.

While the countertops are tough, they will chip when you exact a lot of pressure on them. For example, if you sit or hit them. They will also chip if you place a weighty material on the edges.

What should you do when you have a chip on your countertops?

The logical thing to do is to fix the chip to prevent your countertops from staining or giving your surfaces an ugly look. While any chip on granite can be fixed, you should note that there is no way the granite surface will look as it used before.

You can fix the chip by yourself if you have the skills, but let a professional handle it for the best outcome.

When you contact a professional, they will come to your home and fill the spot with Epoxy. The unfortunate thing is that while Epoxy makes the surface flat and even, it doesn’t look exactly as granite you are replacing.

Epoxy’s sheen is different from granite, and it doesn’t match the granite pattern. This means that anyone can easily tell that you fixed the countertop.

Since there is no way to fix the countertop and it retains its original look, if the chip is small or in a hidden corner, you are better off leaving it the way it is.

How do you prevent chips on your granite countertop?

There are plenty of tricks you can use to prevent the chips from coming about in the first place. These tricks include:

Seal the countertop

Most homeowners seal their granite countertops to prevent stains from coming about. Sealing the countertops not only prevents stains, but also prevents chipping of the surfaces.

To protect your surfaces, seal the countertops with a quality sealer. Apply the sealer in layers a few times a year.

If you aren’t sure when to do the sealing, do a water test. Here you pour ¼ cup of water on the countertop surface and make a note of the time you placed the water on the surfaces.

If it takes more than 30 minutes, and the surface hasn’t darkened, the sealant is still in good shape, and you don’t need to reapply it. On the other hand, if the surface darkens, it’s time to apply a sealant. If the water gets absorbed immediately, apply several layers of the sealant.

Clean the countertops

You might wonder how cleaning the countertops will protect them from damage, but it comes in handy. When the countertops are clean, you not only have an easy time noticing the damage on the surfaces, but you also get rid of items that could lead to etching and staining.

While there are many cleaners in the market, few are right for you. As a rule of thumb, use a quality cleaner that will clean and shine the granite while offering a protective layer.

For the best results, ensure that the cleaner you go with is specially designed for granite counters. To be even sure that the cleaner isn’t causing any damage to your counters, go for one recommended for your specific color and brand.

Make use of bendable trivets.

Instead of placing your hot pots and pans directly on the countertops, place them on trivets, and as a consequence, you protect your surfaces. For peace of mind, make a habit of placing your pots on the heating pads and trivets at all times—regardless of whether they are hot or cold.

The reason for this is because some cold pots and pans might be having a vinegar base, and when you place them on the countertops, they leave the vinegar on the countertops. When the temperatures change, the vinegar begins to react with the sealant, which exposes your surfaces to stains and other forms of damage.

So, do granite countertops chip easily?

As mentioned, granite is tough and doesn’t chip easily. While this is the case, ensure that your countertops are installed by experienced granite installers Rockville. This way, you are sure the contractor won’t install countertops with a large edge that easily chips.

23

Aug

What Should You Know About Sealing Granite Countertops?

You should seal your countertops to prevent them from staining. What should you know about sealing granite countertops? Well, there are plenty of things you should know with the common ones being:

You should seal the countertops at installation.

Most of the granite slabs come the same way they were at the granite store—bare, unsealed, and prone to staining. As you can guess, installing the countertops and leaving them this way is catastrophic as they will be at great risk should a drink spill on them.

For you to be at peace that no stain will result should a spill happen, ensure that the contractors properly seal the countertops before they leave.

Reseal the countertops every year

Even after the contractors install the countertops and seal them, you should make it a habit to reseal them at least once a year. The reason for this is because the sealant tends to wear off with time, and you have to reinstall it to restore its effectiveness.

While it’s good to reseal the countertops, you shouldn’t do it blindly. Before you apply the sealant, test the countertops to confirm they are ready for the sealant.

How do you do this?

There are plenty of ways to go about it. One of the ways is to do the oil and lemon test. Here you need to spill a few drops of lemon juice and cooking oil on the countertops and let them sit on the surface for at least five minutes, then wipe them dry.

If there are dull spots on the areas where the lemon juice hit the surface, the seal might have worn off, and it’s time to reinstall it. The same thing applies if the surface turns dark almost immediately after placing oil or lemon juice.

If the oil and juice stay on the surface for over five minutes without sinking, the chances are high that the granite doesn’t need sealing, and you should leave it in its present form.

Another test you can do to determine if the countertops are ready for sealing is the water drop test. Here you need to drip a small puddle of water on the stone, and if the store immediately darkens, it’s time to reseal it.

If the stone takes 4-5 minutes to darken, the sealer might have worn out, and it’s time to install a new one.

You can seal the countertops by yourself?

Although sealing is such an important part of maintaining the countertops, did you know you don’t have to hire a professional to do it?

To save money and learn a skill, do the sealing yourself. Begin with cleaning the countertops. As a rule of thumb, clean the countertops at least 24 hours before you apply the sealant.

The purpose of sealing the countertops is to get rid of any damaging vinegar, baking soda, lemon juice, harsh cleansers, and bleach.

Remove all the materials on the countertops and wipe them down with a clean, dry microfiber cloth. Then, you should mix one teaspoon of dishwashing detergent and two tablespoons of isopropyl alcohol in a pint spray bottle and fill it with cool water.

Generously spray the countertop, wipe it clean while polishing in a circular motion, and then wait 24 hours before proceeding.

As mentioned above, you should do the cleaning at least 24 hours before you apply the sealant. This is to give the cleaning liquid enough time to evaporate fully.

The next morning, apply a sealant over the entire granite counter begging from the end and work your way to the other. For an easier time and ideal results, apply the sealant in sections, in a circular motion.

Once you are done, give the sealant enough time to absorb, then using a clean, soft, dry rag, wipe out the extra sealant.

If the sealant requires another coat, give it time to cure (between 2-40 hours). To avoid wiping off the sealant, granite installers Rockville recommend you wait for at least 48 hours before wiping the surfaces with a wet substance.

You also should leave the countertops for the same amount of time before returning the kitchenware.

30

Mar

How Do I Get The Best Deal On Granite Countertops?

Although granite counters are beautiful and significantly improve the house’s look, they don’t come cheap. Fortunately, you can do several things to get the countertops at a good price. Are you wondering how do I get the best deal on granite countertops? There are plenty of ways, with the most common ones being:

Shop around and compare prices

What do most homeowners do when they are looking to buy granite counters? They visit the first granite shop and make the purchase. In most cases, they do this because they are in a hurry to get things done and move on to the next thing. This is wrong as they often end up spending too much money than they should have.

To save money and get the best deal, take your time and visit different granite stores and see what they offer. Of course, you should only consider buying from a store stocking high-quality stones at a low cost.

You can’t have ample time if you start your research late, so to ensure you have as much time as you need, start scouting for countertops at least 3 months before you embark on your project.

Buy wholesale

When you buy anything wholesale, you save a lot of money, and you should do the same when you are buying granite counters. The cool thing is most granite stores will sell you the countertops at wholesale prices when you are buying many slabs. There are even some stores that will sell you one slab at a wholesale price—you only need to look.

Be flexible with granite color.

One of the prime factors affecting the price of countertops is the color of the slab, where the rare colors cost more than the easier-to-find colors. As you can guess, this means that if you are looking for a specific rare color, you end up paying a premium for your countertops.

To save money and get a perfect deal, you should be flexible in your color choice. The beauty is since granite is natural, it comes in plenty of colors to choose from. If you are in the granite store and find that your desired granite color is expensive than your budget, choose a cheaper color that is close to your color of choice.

Order from a local supplier

While you can buy the granite slabs from anywhere in the world, it’s good you buy them from your local supplier. The reason for this is because the slabs will be cheaper to transport from the local supplier to your home.

Granite slabs are heavy, and if you ship them from a long-distance, they can cost you an arm and a leg, and you don’t want this, do you?

Granite sellers ship their products in bulk, so they don’t spend as much money as you would if you shipped just a few slabs for your kitchen.

To save even more money on transport, ask the seller if they can transport the slabs for you, for free.

Go for granite remnants.

If you are looking for small granite slabs for certain kitchen elements, such as the backsplash behind the stove, don’t spend a lot of money on whole granite slabs. Instead, get granite remnants.

These are small granite chunks that are leftover from previous projects.

Since they are leftover and often too small to fit an entire kitchen, they are cheaper than entire slabs.

When you are in the granite store, ask for the remnants, and you will get them at a low price, which sees you saving a lot of money.

Go with a standard eased edge.

The type of edge you install on your countertops has a significant impact on the overall cost of granite surfaces, so be cautious of the edge you settle on. As a rule of thumb, choose the standard eased edge as it’s much cheaper than the tiered or bevel edge.

Install the countertops by yourself

If you are a dab hand at DIY projects, save money by bypassing granite installers Rockville and installing the countertops by yourself. Of course, ensure that you follow the right procedure when it comes to their installation.

26

Feb

How to Protect Granite Countertops

Every homeowner wants their countertops to last for as long as possible. And do you know what? It’s possible to do it. To help you out, here are tips on how to protect granite countertops:

Seal the countertops

This is a no brainer. In fact, this is the first thing people think about when they think about protecting their granite. Since granite is porous, it’s paramount that you protect it from stains by sealing it.

To do it, seal the surfaces immediately after installation, then at least once a year thereafter. For best results, use a high-quality sealant. An expert should do the sealing work.

Clean the surfaces regularly

You might have the impression that cleaning the countertops is an aesthetic issue, but this isn’t the case. Cleaning the countertops is a protective measure. When you regularly clean your countertops, you remove dirt and other materials that can scratch the surfaces.

The good thing is, you don’t have to be fancy about granite cleaning. Wiping the surfaces with a damp, soft cloth and some soap is enough. Wait for the surfaces to dry, then buff them as much as you can.

Cleaning the countertops is essential, but you will be doing more harm than good when you use the wrong cleaning products. To keep your countertops in top shape, use non-abrasive cleaners. To be even in a better place, use cleaners specially designed for granite surfaces.

As you prepare the meals or have a good time with your friends, it’s common for spills to happen. For example, juice or even water can spill on the countertops. When an accident happens, move with haste and get rid of the spills as soon as possible.

Although your countertops are sealed, letting large amounts of liquids stay on the surfaces for long is inviting disaster as the liquids can seep into the stone’s deeper layers and become hard to remove.

Protect your surfaces from extreme heat

It’s no doubt that granite is tough and can withstand a lot of heat, but it’s not heatproof. This means you will damage the countertops when you repeatedly expose them to a lot of heat.

Thankfully, you can prevent this from happening by placing your hot pots on hot pads, trivets and other protective items.

Even when taking hot coffee, don’t assume your countertops are tough and will take the heat. Have a coaster under the cups at all times.

Don’t sit on the countertops.

When you look at the countertops, they appear solid and extremely strong that many homeowners are tempted to sit or even stand on them. Don’t do this.

Despite the tough appearance, granite is brittle, especially on the edges, so when you exert a lot of pressure there, you risk breaking it.

To avoid this, don’t sit on the countertops when you are in the kitchen. You also shouldn’t step on the surfaces to reach the top shelves or replace the bulb. Instead, use a ladder.

If you often have people with you in the kitchen, have a few seats in place, so they aren’t inclined to sit on the countertops.

Ensure the countertops are installed by an experienced professional

You may be wondering what granite installation got to do with its protection, but the two go hand in hand. When your countertops are poorly installed, they are more likely to break or even fall from the cabinets and get damaged.

To avoid this, ensure your countertops are installed by experienced and certified granite installers Rockville.

The beauty of it is that it’s easy to find these contractors—you only need to be patient and strategic when doing it. The first place to ask is your friends and relatives. If none has recently worked with a contractor, try it online.

Do a Google search and interview the potential technicians that you find. Many people hire the first contractor that shows up first in the search results. Don’t do this as ranking first on Google isn’t proof they will provide a good service.

The key to finding the ideal contractor is to not be in a hurry. Have several interviews with the technicians and settle with the most experienced.

It also doesn’t hurt working with a contractor with a great personality.

28

Dec

Can You Remove Granite Countertops and Reuse Them?

Imagine this. You have spent thousands of dollars renovating your house with premium granite counters then due to unforeseen circumstances, you have to move out of the house or sell it.

You can’t imagine moving to the new house without the seamless design, durability, ease of maintenance, and color patterns of granite.

Can you remove granite countertops and reuse them? You wonder. The simple answer is it’s most likely impossible as there are plenty of hurdles you have to go over for it to be a success. These hurdles include:

You have to match the kitchen space layout

Since you had already cut the slabs during installation, the only way you can use them in your new home is if they fit the footprint of your new kitchen cabinetry.

This means if in the old layout the granite had cutout around the wet bar area or around the sink area, for you to reuse your countertops in the new kitchen you should have the exact layout, which as you can guess is highly improbable.

Even if by miracle the old and new kitchen layouts match, you have problems if the new kitchen is larger than the old one.

In such a scenario you have to find matching granite pieces which can be difficult if the granite pattern and color is unique.

Even if you manage to get the piece, you will have a visible seam where you attach the additional slab. As you can guess this can significantly affect the look you are trying to achieve.

So to conclude, for you to successfully remove and reuse your kitchen countertop, the two houses should have similar cabinet layouts. The length and width of the countertop should fit the cabinet dimensions.

If you have excess granite, your contractor can trim it down, but if the granite is not enough, you have plenty of issues to solve.

High granite damage risk

Most homeowners install granite for its tough and indestructible nature, but you should know that granite is heavy and brittle.

This means it’s almost impossible to remove the countertops in one large slab as the risk of damage is high.

For you to safely remove the countertop, hire a professional to come with special tools, which as you might guess isn’t cheap.

You also have to involve several people to hold along the countertop’s length to avoid pressure points that might lead to cracking.

Even when you hire experienced contractors, most of them will require you to sign a contract that frees them from liability should the granite crack during removal. This is due to the high risk of damage that comes with removing the stone.

Before you decide to remove the granite, find out the type of granite you have. Granite can be weaker and fragile or it can be harder and stronger. Obviously, you should go for one that is harder and stronger as it will be easier to handle and move without risking a lot of damage.

You also should consider the thickness of the granite counter. It’s better to remove a thicker slab than a thinner one. To tell how thin your countertop is, check it from beneath the cabinet.

If there is plywood below the granite, then the countertop is thin and has high chances of cracking but if there is no plywood, the stone is thick and there are chances of removing it with no issues.

Work with an expert contractor

There are plenty of perks that come with removing and reusing granite counters. One is you don’t leave behind your precious countertops you spent a lot of money on.

Secondly, you don’t have to break the bank to purchase new countertops in your new home.

While this is great, as discussed above, it comes with plenty of challenges you have to be strategic when approaching them. To increase the chances of the process being successful, work with experienced granite contractors Rockville.

The contractors should have removed and reused other countertops in the past. When you hire the right ones, they will help you decide whether it’s wise to remove the countertops or not.

The contractors will also remove and reinstall the countertops if the stone is healthy enough for reuse.