31

Jan

7 Excellent Kitchen Countertop Cover-Ups

Don’t like the current look of your countertops? Don’t rush to hire countertop replacement services providers, as there are several ways you can cover your countertops without requiring contractor services. To help you out, here 7 excellent kitchen countertop cover-ups:

Tile the countertops

Tiles are excellent at covering floors, walls, and showers, and there is no reason you shouldn’t use them to cover up your old countertops. When choosing the tiles, go for glazed ceramic and porcelain tiles as they are the most stain and heat resistant.

They also come in a wide range of sizes, shapes, and colors. Avoid natural stone tile as it requires periodic sealing that can be too much work on your part.

You can install the tiles directly on your countertops without removing the old countertops. You only need to ensure the tiles are flat and stable enough to prevent the new tiles from cracking.

As you are installing the tiles, you should note that while tiles are durable and easy to maintain, the grout joints are prone to staining. To minimize the stains, seal the countertops as soon as possible after installing the tile. You should then apply the sealer every few years to maintain the protective barrier.

Lay laminate over the countertops

If you have old laminate countertops with square edges, you can cover them with a new laminate layer. The layers are sold in sheets of up to 5 feet wide and 12 feet long, and all you need to do is to visit your local store and place your order.

If your countertops have raised and rounded edges, often known as waterfall edges, you can’t cover them with new laminate surfaces as the new material can’t conform to the edge contours.

Use a countertop refinishing kit.

Refinishing kits have everything you need to cover your countertops. The refinishing kits include an epoxy-like paint and decorative stone chips that create the natural stone look.

To cover your countertops using the kit, you simply need to follow the kit’s instructions. While this method is highly effective, you should note that it involves a lot of hard work, it’s messy, and you need to pay close attention to the kit’s details.

Cover your countertops with wood

Have you always wanted butcher block, or are you drawn to the beauty of real wood countertops? You can cover your old, beaten countertops with wide planks of solid hardwood. You can even get creative and use a blend of hardwood and bamboo plywood.

The cool thing with hardwood is it’s more durable and repairable than plywood. Only plywood comes in larger pieces and is more affordable.

Bamboo plywood offers the best of both worlds. It has a thicker top layer that ensures it’s durable and easy to repair and at the same time comes in 4 x 8-foot sheets like regular plywood.

You should note that covering your countertops with hardwood requires woodworking skills and the right tools. You can do the work by yourself if you have the skills or hire a professional to help you out.

Install modular granite

Also known as granite or stone overlay, modular granite is a system of small thin stone slabs designed to cover old countertops. The stones are 16 by 18 inches wide, which means there are fewer joints between the pieces.

For the problematic inside and outside corners, there are special pieces made for these sections, as well as the optional edge pieces.

Cover the countertops with film

Countertop film is thicker than shelf or contact paper. Many people refer to it as a cross between vinyl flooring and shelf paper and have a self-adhesive backing for sticking directly to the old countertop surface.

To install the film, layout the film, trim it to a rough size, and align it to the countertop edges. You should then stick it down using a squeegee tool to remove the air bubbles.

While the film will cover your ugly surfaces, you should note that it’s not a long-term solution, so use it as a temporary way of covering your surfaces.

Paint the countertops

Painting your countertops is easy, fast, and gives you immediate results. You can also do it by yourself without involving granite contractors Rockville or other professionals.

30

Jun

Common Types Of Granite Countertops Damage

Like any other countertop material, granite countertops suffer different forms of damage. Some are simple, and you can easily fix them on your own while others are complex, and you have to ask a professional to take a look at them. In some cases the damage is so extensive you have to replace the entire countertop slab.

Some of the damage your countertops can have include:

Separating seam joints

This happens when the adhesive is falling apart. If the seams are coming apart several years after installation, it could be due to old age, but if you recently installed the countertops and they are coming apart, it might be due to improper installation.

Seams come apart if they are too large, the contractor used the wrong epoxy, or the contractor didn’t put enough work into them.

To fix the problem, you need to contact a reputable professional and ask them to inspect the countertops and find out what they can do to fix the problem.

Chips along the countertop edges

Countertops will develop chips along the edges, especially where most of the cooking happens. The chips come about due to constant contact of the cooking utensils with the countertops.

To fix this issue, ask a professional store technician to inspect the chipped surfaces carefully. The contractor should then prepare the area and apply a color matching epoxy material. An experienced professional won’t have a problem fixing the area and hiding the etched surfaces.

Dullness around the sink

It’s normal for countertops to dull around the sink area due to the activities that take place there. Since the surfaces are in constant contact with water and exposed to cutting activities, granite tends to dull and even wear and tear out fast.

Luckily, you can restore the dullness with a diamond refinishing system. Ask a professional technician to help you out, and you will restore your countertops to as good as new.

Cracks

Cracks completely spoil the aesthetic appeal of the house. Luckily, if the cracks are small, you can fix them, but if they are large, you have no way out other than to replace the entire countertop slab.

Cracks on the countertops come about due to plenty of reasons that include:

  • Poorly glued joints
  • Installation of the countertops on uneven surfaces
  • Failing to give glue enough time to settle
  • Putting a lot of weight at the center of the countertop

If the cracks are small, you can easily fix them with adhesives; however, if they are deeper, you may have to remove the damaged portion, then replace it with a better one. Countertop installers sometimes use special fillers when they feel the cracks aren’t too large to warrant replacement.

When choosing filler, choose one that sticks effectively to your countertops.

Staining

You will have your countertops staining around stoves and cooktops. If you haven’t sealed your counters, the surfaces will absorb oil-based stains and darken. To restore your countertops to their former glory, you need to use Poultice.

Apply the material on the stained area and cover it with a plastic seal. Over time, the solution will dry and turn to powder that will absorb the oil stain. If you find the stain isn’t going away, you can reapply Poultice as many times as you want until all the stains are gone.

Water damage

They say water is life, but did you know it can be deadly to your countertops? The effect is worse if you have a small kitchen. If you haven’t sealed your countertops, water will get to the inner layers and stain your surfaces

Luckily, in most cases, the stain goes away when water evaporates. If water was stained (such as in juice), you have to ask a professional technician to help you out.

High-temperature effect

Granite counters are known for their toughness and ability to withstand high temperatures; however, when you introduce extremely high temperatures at once, the counters are bound to get damaged.

For example, when you carelessly place a hot pan (straight from a flame), directly on the surfaces, you will damage the countertops. Granite companies Potomac recommend you try salvaging the ugly spots using toothpaste. If this doesn’t remove the spots, replace the countertops.

14

Nov

Granite Contractors: 4 Ways To Keep Your Countertops In Pristine Condition

 Granite countertops don’t come cheap; therefore, when you install them, you should do the right things that make them last for as long as possible. Some of the things you should do include:

Clean them daily

When you clean the countertops daily, you prevent stains, bacteria, and spills from penetrating the seal and seeping into the stone pores.

Clean the countertops with water and a few drops of dish soap. Mix the two into a spray bottle then spray directly on the counter surfaces. You should then wipe the surfaces with a clean cloth then rinse with clean water.

Cleaning the surfaces frequently also prevents them from getting foggy and grimy with stains. As a result, you have shining countertops.

Avoid things that can destroy the countertops

There are several things that ruin countertops. They include:

Exposing the countertops to hot pans: While granite is highly heat resistant, it doesn’t mean you should consistently place hot pans on it. The hot pan might not leave an instant burn mark on the countertop, but with time, it might scratch the surfaces making the countertops ugly.

Placing items on the countertops: Placing items on the countertops either for functionality or decoration causes scratches. If you place a lot of items on the countertops, you risk creating scratches that tarnish the look of the countertops.

For you to keep the surfaces in top shape, avoid directly placing heavy items such as vases, bowls, and canisters on the countertops. The right thing to do is always to place a mat under the item.

Sitting and standing on the countertops: When you have many people in the kitchen, the countertops provide convenient sitting space. They also make excellent stepping areas when trying to reach for an item at the top shelf.

The pressure you apply on the countertops when you sit or stand on them can cause cracks that are expensive to repair. To avoid it, avoid standing or sitting on the countertops.

Cutting directly on the countertops: Since granite is tough, it’s easy to be tempted to cut directly on it. Cutting directly on the surfaces not only causes damage to the countertops, but it also damages the knife.

For you to avoid damaging your countertops, always have a chopping board with you. Never cut anything directly on the countertops.

Practice good habits

Good habits will go a long way at keeping your countertops in pristine condition. Some of the things you should do include:

Getting rid of spills as soon as they happen: Even if your countertops are sealed, leaving water and other liquids on the surfaces for a long time increases the chances of stains developing. To avoid this, get rid of spills as soon as they happen.

Use specially designed cleaners: While water and dish soap will clean the countertops and get rid of all bacteria and stains, over time, they start making the countertops foggy. For you to give the countertops a shiny look, once in a while use cleaners that are specially designed for granite.

You can visit your local store or ask your granite contractor for recommendations of the right ones to go for.

Use soft sponges and cloths when cleaning: Even if you want to remove stains from the countertops, avoid using scratching, abrasive, or harsh cleaning materials. When cleaning or removing spills from the countertops, use soft and clean cloths.

Seal the countertops

Sealing granite countertops prevents liquids from seeping in and causing stains. When you are installing the countertops for the first time, ask granite installers Montgomery to seal the surfaces with a quality sealer. A good quality sealer should protect the countertops for a few years after which you must reseal the surfaces.

For you to tell the right time to reseal the surfaces, spill a liquid on the countertop. If the surfaces start darkening, it means the liquid is seeping in. Find a reputable contractor to reseal the surfaces.

Parting shot

How you interact with your countertops not only affects how they look, it also determines how long they last. Clean the surfaces regularly, protect them from hot appliances, avoid applying a lot of pressure on them, and you will have countertops you are proud of.